Tune ecu mapping problem

You could be running out of storage on your Android device so the backup fails at 20%. Just out of interest what size are the maps?

I've got the cable and TuneECU but not really messed about with it yet. The first cable I got from eBay was one of those dodgy Chinese ones with a copied chip that was mentioned earlier, cost about £5 with P&P. What a pile of shite that was. After two cables exchanges and about 3 hours trying to get my laptop to install the drivers, I gave up and got a Lonelec one (think it was about a tenner) this works a treat so far and although I've yet to use it for backing up or installing maps I can't see why it wont work.

When I get the chance I'm going to disable the AI and block the pipe from the air filter to see if it helps the low rev throttle response.

 

Hi I've used tuneecu for several years now on three different model triumphs, tips on here are all good, but the following hasn't rated a mention, I have found it works well in XP. But all updates - yes All updates is recommended, even some that are just advised. Win 7 and 10 work fine. They will automatic up date all req files and drivers to run tuneecu/cables etc... If you have any problems running tuneecu. You need to do the following, a constant charger on bike battery ( older style best) that charges/runs @ 14.6v regardless of amps out ! Put the device running tuneecu on its charger too ! If you know how too. Switch of all background programs in Windows use " msconfig". Its a command/prompt tool, and if all this fails. Check for up to date drivers for your cable/chipset.