The Street Twin Cometh - Soon!

Discussion in 'Triumph General Discussion' started by SpeedM, Aug 26, 2016.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. om15

    om15 Active Member

    Sep 5, 2016
    107
    43
    dorset
    SpeedM , thanks for the link, I will look into the chain cleaner, I have always used kerosene for cleaning everything, but will try your recommendation.
    Pompey, I will have a look at your lube, many thanks,

    om
     
  2. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,066
    1,000
    Central France
    I use one of these on my Tiger :

    http://www.loobman.co.uk/

    Excellent as it lubes both sides of chain and keep it beautifully clean. Easy to install as there's no need to find a vacuum point on the bikes' engine.

    Plus it's cheap !!!!!!!!!!!!!!!!!
     
  3. SpeedM

    SpeedM Member

    Apr 30, 2013
    47
    18
    South Coast
    Bit of a late update but finally got round to purchasing a centre stand for the Street Twin, in the absence of previously promised pattern parts I went for the Triumph one (£200). Took a bit longer to fit than I expected mainly due to lack of flexibility in arthritic fingers but all fitted and works as it should with little effort to rock bike back on to stand.
    I was surprised how flimsy the hollow tube that fits into the pivot tube of the stand is and it is only fixed on the rh side frame lug with a M6 12mm screw. I was expecting something a bit more solid but it does the job and Triumph do test all parts for function.
     
    • Like Like x 1
  4. Rich Bryce

    Rich Bryce Dead Eye Dick

    Sep 18, 2015
    2,991
    1,000
    Bedford
    Apart from mirrors. I too took the first opportunity to put on bar-enders in place of the stock mirrors which admittedly are great if you want to check your shoulders and elbows are still there during a ride. I mentioned this to the Service Manager at the 500 mile check and he told me most customers are doing likewise.
     
  5. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,807
    450
    West Yorkshire
    To me the centre stand is an essential, it makes cleaning the bike and maintenance so much easier.
    I bought this great little jack for £33 off Fleabay, excellent for working on the front end or lifting the whole bike.

    IMG_0759.JPG
     
    • Like Like x 1
  6. SpeedM

    SpeedM Member

    Apr 30, 2013
    47
    18
    South Coast
    Agree about the mirrors (see previous posts) about as much use as a chocolate teapot for rh side as was Triumphs' response. I am still struggling with standard mirrors as I prefer the styling and also have a limited width to get the bike through at the end of my drive and the bar end mirrors don't appear to fold in. I am hoping that as Triumph are now aware they may produce an extended rh mirror on later models that I can fit to my bike. At the moment I am looking at the various mirror extenders on the market but the position of the brake reservoir limits the options. In the meantime relying on "lifesaver" and prayer that I don't get wiped out but I will have to do something.
     
  7. SpeedM

    SpeedM Member

    Apr 30, 2013
    47
    18
    South Coast
    Looks like a handy bit of kit, I have a simple cruiser lift for getting the bike off the ground but found that it bent the sump plate that I recently had fitted hence the centre stand for chain maintenance.
     
  8. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,807
    450
    West Yorkshire
    Hope the sump plate didn't damage the part it was supposed to protect!
    Nice thing about the jack is that it can be easily set to the frame width, and lifts on the frame tubes missing the sump and oil filter which are both slightly below the frame.
     
  9. dickydido

    dickydido Senior Member

    Nov 3, 2016
    349
    113
    Wiltshire
    ...when I was 'tasked' with putting in a complete new kitchen for Mrs dickydido, I made up this bit of kit from a 5 quid scissor jack from Halfords and attached, top and bottom, a couple of bits of wood lying around in the garage. I used it to jack and hold up the wall units in place while I fixed them onto the walls when I was working on my own....worked a treat.

    After the kitchen was finished it turned into my bike jack!......and being topped with wood it is gentle on the bottom rails and sump of the bike.

    Cheers,

    dickydido

    IMG_0405.JPG
     
    • Like Like x 4
  10. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,066
    1,000
    Central France
    Excellent example of "out of the box thinking" - congratulations !!!!
     
  11. Rich Bryce

    Rich Bryce Dead Eye Dick

    Sep 18, 2015
    2,991
    1,000
    Bedford
    Wish now I hadn't given mine away. It used to get a lot of use on my old Triumph Herald.
     
  12. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,807
    450
    West Yorkshire
    Good idea but that would be be jacking up on the sump on my Bonnie, which I wouldnt want to do.
     
  13. SpeedM

    SpeedM Member

    Apr 30, 2013
    47
    18
    South Coast
    As the plate fits to lugs on the underside of the cradle frame there is a gap which prevented contact with the cat and sump just slightly out of shape now. One reason for fitting it was that I thought that it would spread the load of the lift bar but not as solid as I thought. At least with the centre stand fitted it's there all the time and although it doesn't lift the back wheel that high it's fine for cleaning and chain maintence etc.
     
    • Like Like x 1
  14. SpeedM

    SpeedM Member

    Apr 30, 2013
    47
    18
    South Coast
    That's just reminded me I've still got an old scissor jack somewhere in the back of my shed - bit late now!
     
Loading...

Share This Page