Featured Restoring A T100c

Discussion in 'Builds & Projects' started by darkman, Feb 18, 2018.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Page 3 of 6
  1. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    #41 Ken walburn, Mar 27, 2018
    I can only imagine. Appears to me that if you are carrying out a restoration for profit, corners will be cut & pride in workmanship tends to take a back seat?
     
    • Agree Agree x 1
  2. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #42 darkman, Mar 27, 2018
    I just feel sorry for some of these people as they are spending 15/20 K on some classics only to find out its rubbish, most of the bikes i have come across then req a full engine rebuild at the best and some a complete strip and rebuild :-(
     
  3. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,454
    800
    East Riding of Yorkshire
    #43 stevethegoolie, Mar 27, 2018
    Nice to see a front mudguard that actually fits properly:cool:. So many these days seem to be too far away from the wheel or just too big for it (or the wheel too small perhaps? Either way it looks wrong!):rolleyes:. Or is it just me being weird?:confused:
     
    • Like Like x 1
  4. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #44 darkman, Mar 27, 2018
    Thanks, the mudguard was mullered when we got it but it is an original stainless one so i was able to reshape it and remove all the dents with my old panel tools that i have not used for years, then i just polished it. As for fitting its just a matter of understanding how to use the adjuster on the leg and bend the bottom bracket to work with in the range of the adjuster.
     
    • Like Like x 2
  5. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #45 darkman, Mar 28, 2018
    Long day today sorting the old original rear mudguard, loads of dents and bad corrosion on the front meant i had to resort to using air tools to get a satisfactory finish for polishing :)

    20180328_100306.jpg

    20180328_184444.jpg
     
    • Like Like x 6
  6. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    #46 Ken walburn, Mar 28, 2018
    Wow! Amazing. You have such a talent. IDEA. What would be great is if there was an enthusiastic young man or girl out there that would love to learn such skills from you.
     
    • Agree Agree x 1
  7. dilligaf

    dilligaf Guest

    #47 dilligaf, Mar 28, 2018
    WOW:eek::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool::cool:
     
    • Like Like x 1
    • Agree Agree x 1
  8. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #48 darkman, Mar 28, 2018
    Sadly young people have other interests these days Ken.
     
    • Agree Agree x 1
  9. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #49 curly, Mar 29, 2018
    Truly remarkable!
    So glad that you're sharing your rebuild with us mere unskilled and salivating onlookers.
    I can't wait to see the finished product.
    You should go into business, 2 jobs like this per year for carefully selected existing owners of bikes needing rebuilds could raise some healthy capital I would say?
    What do I know though?
    Keep up the first class work Darkman.

    Curly
     
    • Like Like x 1
    • Agree Agree x 1
  10. MonkeyHanger

    MonkeyHanger Active Member

    Sep 3, 2017
    116
    33
    Barnstaple, Devon
    #50 MonkeyHanger, Mar 29, 2018
    Proper job that is, nice to see such care being taken.
     
    • Like Like x 1
  11. OsteKuste

    OsteKuste Intergalactic Warlord
    Subscriber

    Oct 22, 2017
    2,197
    943
    Tennessee, United States
    #51 OsteKuste, Mar 30, 2018
    Looks amazing! I’m enjoying my new Twin, but I really want a resto project some day. I found a ‘64 that is a survivor, been in a garage it’s whole life and runs well. Owner was asking $5500. Sadly I’m not ready to throw down more money on bikes yet. This project gives me inspiration though! Thanks for letting us live vicariously through your hard work!
     
    • Like Like x 2
  12. lexy

    lexy Well-Known Member

    Aug 19, 2017
    251
    63
    Midlothian
    #52 lexy, Mar 30, 2018
    absolute brilliance and inspirational......
     
    • Agree Agree x 2
    • Like Like x 1
  13. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #53 darkman, Mar 30, 2018
    Well Su finally lapped the valves in to her normal high standard and let me have the head back so that we could refit it, no probs with refitting head but the new crossover pipes were appalling and it took us ages to get them to line up correctly with the H pipe and old silencers :-( Got there in the end and called it a day.

    20180330_172852.jpg

    20180330_172823.jpg

    20180330_172836.jpg
     
    • Like Like x 6
  14. dilligaf

    dilligaf Guest

    #54 dilligaf, Mar 30, 2018
    Absolutely stunning :cool:
     
    • Agree Agree x 3
    • Like Like x 1
  15. Tiglet

    Tiglet Vintage Member

    Mar 28, 2016
    4,434
    1,000
    Cheshire
    #55 Tiglet, Apr 2, 2018
    As an old fart who owned a few Pre unit Triumphs from 1967 and the odd unit construction I’ve followed this thread with interest and I don’t think words can do justice to you and your partners attention to detail and skill base.

    Unless I’ve missed a post what cam are you running with those pistons.

    Thanks and please continue posting:)
     
  16. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #56 darkman, Apr 2, 2018
    The cams are the standard triumph ones that cover the later T100 model range as they have two different timing settings, one for twin carb and the other for single. As for the pistons they are again standard parts with only 9.1 compression pistons its just the later head and piston design changed to a more hemispherical type.
     
    • Like Like x 2
    • Useful Useful x 1
  17. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #57 darkman, Apr 5, 2018
    At last i have finished painting all the black parts and i will be able to do the tank next, i have started work on the electrics and just have the last few painted bits to fit then i can start her up. Whilst waiting for the paint to dry in the oven i bartered some of my spare time by removing a rear 1/4 from an accident damaged car and prepping it for a new panel, they now have plasma cutters so i gave it a go :) as good as it is i still prefer the old air cutoff disc tool even if it has BMW grills on lol.

    20180405_153044 - Copy.jpg

    20180405_153050 - Copy.jpg

    20180405_153123.jpg

    20180405_103745 - Copy.jpg
     
    • Like Like x 7
  18. mpllineman

    mpllineman First Class Member

    Feb 12, 2018
    826
    500
    Pearl,Ms.
    #58 mpllineman, Apr 6, 2018
    Drop dead georgeous. This bike already looks better than it did when new, I feel safe to say! I'm green today bro.
     
    • Like Like x 1
  19. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    #59 darkman, Apr 10, 2018
    • Like Like x 10
  20. TEZ 217

    TEZ 217 Crème de la Crème

    Mar 6, 2016
    3,150
    1,000
    south shields
    #60 TEZ 217, Apr 11, 2018
    That paintwork is terrific well done enjoying your post :cool:
     
    • Like Like x 1
Page 3 of 6
Loading...
Similar Threads - Restoring T100c
  1. Bikerman

    The Epic Task Of Restoring A Ww2 Lancaster To Flight

    Bikerman, Apr 16, 2022, in forum: Lounge
    Replies:
    4
    Views:
    526
    Bikerman
    Apr 16, 2022
  2. Tigcraft

    Anyone Good At Restoring Artwork On Decals?

    Tigcraft, Dec 23, 2018, in forum: Lounge
    Replies:
    10
    Views:
    1,288
    Rich Bryce
    Jan 1, 2019
  3. darkman

    Restoring A 1969 T100r

    darkman, Aug 4, 2018, in forum: Builds & Projects
    Replies:
    121
    Views:
    10,998
    MadMrB
    Aug 26, 2019
  4. andypandy

    Restoring old engine casings

    andypandy, Nov 3, 2016, in forum: Technical Help
    Replies:
    8
    Views:
    2,020
    MickEng
    Nov 6, 2016
  5. Shabuti

    1969 T100c Rubber Mounting Engine?

    Shabuti, May 18, 2024, in forum: Vintage Classics
    Replies:
    9
    Views:
    1,225
    Wicked Pete
    Nov 1, 2024

Share This Page

Sign up