Thruxton Post your Thruxton pics here

Discussion in 'Thruxton, Scrambler & Trident' started by Rob, Apr 30, 2012.

  1. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    That one is my sons girlfriend, not mine.
    I own an 09 Transit:)
     
    • Like Like x 1
  2. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    Spacefrog, there’s a second hand cafe racer fairing on E bay under Thruxton 1200 parts, if you still want one
     
  3. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    The suspension has transformed it, it’s actually softer with more control.
    It now tracks the road without bouncing off,the Standard suspension although fine is much more aggressive.
    And the rear shocks have harder than standard R springs but with the different damping actually feel softer
     
    • Like Like x 1
  4. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    cant see it Glyn, maybe its sold…...
     
  5. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK

    As your suspension is probably on the standard setting as regard the spring loading, i put mine down one setting, you think that would make it firmer but it make it somehow softer…. i also found it alot better if you get yer weight right back if you are on a bumpy road its a load easier going……
     
  6. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    It’s still there under Triumph Thruxton 1200/1200R cafe racer fairing white
     
    • Like Like x 1
  7. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    The rear springs are 4 pounds heavier than stock and the shocks have been serviced and revalved
     
  8. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    still cant see it, do you have a link?
     
  9. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
  10. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    nope…. cant see it, you are using the Ebay app, if you look on the Ebay site it aint there.
    item number?
     
  11. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #550 Glyn Phillips, Jan 23, 2019
    Last edited: Jan 23, 2019
    ok, it was there at 10:01 top left of picture eBay item no 183636128665 eBay uk
     
    • Like Like x 1
  12. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    New dust cover

    96676053-2FEB-4911-AED5-CF1C4F2D44C2.jpeg

    229DA42E-EA41-4A28-A82C-A38DB2D32F78.jpeg
     
    • Like Like x 3
  13. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
     
  14. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    On last years Scottish trip my Factory fitted Pirelli rear tyre wore down to the carcase, (bike had covered 3500 miles) half way through the trip.Had to renew with what was available in the Highlands. Fitted a pair of Michelin Pilot Road 4. Have to say been very pleased with them, wearing nicely, (bike has covered 8000 miles now & they still look fine) good feedback & reasonably good value. Will renew them again after this years Scottish trip prior to the GMU, will prob go for Michelin Road 5, better looking tread pattern. The Pirelli wore out soooo quickly, way too soft for Road use imho.
     
  15. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    Did you find it?
     
  16. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    I suppose apart from being a soft tyre theres so much power on acceleration will wear the tyre quickly anyway, so do you know that you can fit pretty much any brand of tyre bearing in mind it has a tube, as i did read that tyres you fit with a tube were different to tubeless, seems a bit silly really,
     
  17. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    yes i did Glyn, thanks for that. not really sure about a fairing and what with all the work involved with getting it sprayed and wot not.
     
  18. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #556 Glyn Phillips, Jan 24, 2019
    Last edited: Jan 24, 2019
    Depends on how much you want one.
    Mine cost £70.00 to paint but I gave the guy£100.00 so if you really want one ,if it goes for less than £350.00 with the paint it would be just over half price
     
  19. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    You can fit any tubeless type tyre to the spoked rims with a tube. I have not noticed any reduction in feel or grip levels between the Pirelli & the Michelin, but have noticed a massive difference in longevity, so go figure?? You may need to order new tyre in as they are not the most common of size & profile. I would always recommend renew as a pair even though the front may look ok. Talking of acceleration / The hike in torque since re mapping the ecm at Hilltop is amazing!
     
    • Thanks Thanks x 1
  20. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK

    So Ken, what is the bhp of your bike now?
     
  21. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    Haven’t had it Dyno tested, but noticeable difference. I would guesstimate HP up by 5% but thetorque is the real difference ( at least 20%). Max torque comes in slightly higher at around 2500 rpm but it pulls like a train up to the red line which has also been raised slightly. In sport mode ( I ride most of the time) it’s brilliant. Highly recommended & easy too & nottraceable. Happy days :yum
     
    • Like Like x 1
    • Agree Agree x 1
  22. MattGaydon

    MattGaydon Noble Member

    Jun 11, 2015
    1,090
    443
    Godalming
    Do the rear pegs touch the exhaust at all or sit above it?
     
Loading...

Share This Page