New Street Twin Tracks Left

Discussion in 'Technical Help' started by Phill Pounder, Sep 24, 2020.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Phill Pounder

    Phill Pounder Member

    Sep 24, 2020
    43
    18
    Derby
    Great - that's how all my previous bikes have been.
    Now I have found that my forks are twisted to point the wheel to the left, I am not surprised that the bike is not going straight. You have to ask how Triumph could hand over this unstable mess to a paying customer.
     
  2. BigCLM

    BigCLM Senior Member

    Nov 30, 2017
    1,018
    243
    San Rafael, CA
    Warranty item?
     
  3. Phill Pounder

    Phill Pounder Member

    Sep 24, 2020
    43
    18
    Derby
    Oh Yes!
    I loosened all pinch bolts this morning and gave it a shaking then retightened, and road tested.
    Improved but not perfect.
    Dropped it at dealers for 600mile first service
    He said not even the front wheel is inserted in UK, bike comes fully assembled from theThai factory.
    Aha! Blame being pointed overseas, not the pdi then...hmmm!
    I asked for a full frontal shakedown, assessment and retorque.
    Hope they do it - or I am off.
     
    • Like Like x 1
  4. covid-21

    covid-21 Well-Known Member

    Jul 30, 2020
    104
    83
    QLD Australia
    As said up thread, don't piss around with this at all, first contact consumer affairs and fully understand your rights, ask them to tell you how to respond to any dealer belligerence then take it back to the dealer and explain to them what you will do if they don't do fulfil their obligations.
     
  5. Phill Pounder

    Phill Pounder Member

    Sep 24, 2020
    43
    18
    Derby
    The bike is currently with the dealer for 600 service and attention to the handling.
    I collect tomorrow.
    Hopefully they will have done their job and I will have a great machine returned to me.
    If not...
     
    • Like Like x 2
  6. Phill Pounder

    Phill Pounder Member

    Sep 24, 2020
    43
    18
    Derby
    Ok.
    Bike handed back today.
    They say they slacked everything on the forks, wheel out, and reassembled
    Pretty near straight now, so I will see how it goes...I will allow time for the tyres to settle down to this realignment just in case they had started to wear one-sided. Clunky gearbox? 'Give it time' they said.
     
    • Like Like x 1
  7. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    How much free play do you have at the clutch lever? It sounds like the clutch is dragging a bit and causing the clunk.
    It was obvious that your new forks were misaligned in the yokes/triple trees........!
     
  8. Phill Pounder

    Phill Pounder Member

    Sep 24, 2020
    43
    18
    Derby
    Agreed on the forks alignment. Blame the Thai factory?
    Mr dealer has set about 2-3 mm slack...so he is thinking along the same lines...
    I shall put more miles on and maybe it will settle in. My last two Hondas smoothed out after 1,000 miles so we shall see.
     
    • Like Like x 1
Loading...

Share This Page