Bar end Mirrors - removing the original fixing

Drill the old thread out 5mm and tap it 6mmx1mm then use the bolts which came with the mirrors hth

 

Do you get them from the shop with tartan paint left handed screwdrivers and a long weight?

 

Must be nearly there with the 'oldies' now Rocker. lol
They still bring a smile every time I hear them, as I am sure they do to all who have contributed.

 

Don't forget the glass hammer!

 

No one's mentioned the bubble for spirit level yet.

 

Ah well!
You can actually buy replacement bubbles, but they are encapsulated in a glass vial, so strictly speaking you are not buying just the bubble. lol

 

Another even simpler method is to 'jack out' the insert using a 'long enough' bolt, a large flat washer (bigger than the handlebar O/D) and a nut.
1) Screw a nut up the bolt thread
2) Fit the washer onto the bolt
3) Screw the bolt fully into the insert
4) Tighten the nut slowly against the washer which should 'jack out' the insert.

 

Nice one. Got any pictures?

 

Mine just screwed out

 

I just drilled the holes out with a 7mm drill and ran a M8 through the hole and then used the bolts which came with the mirrors.