Separate names with a comma.
1979 t140e... 1 3/4" SU Carb Conversion. CMA Cast Wheels.
As we are talking about the head conversion here's a couple of pictures of the modified cylinder head as its an SU Carb conversion. I'll be...
Time will tell... There is absolutely no information on these conversions that I can find, someone has taken a lot of time & effort into welding...
So I molded a 10mm thick FKM rubber block at work in order to try bridge the gap between the carb & airbox. [IMG] I did a trial fit of the slab...
So I'd thought I'd do a trial fit of the SU carb whilst I wait for the four head bolt washers to arrive [img] The previous owner(s) / modifiers...
Whilst I / we were pondering the alternator nut/thread issue I did a trial fit of the head... I'm using a thicker copper head gasket as the head...
The locking tab is on there but I haven't bent it over as yet... I just wanted to see what you guys reckoned first on the thread issue...
Is this right as the stud is not flush with the end of the rotor?... The stud is the right length and is fitted correctly into the crank with the...
Cheers Darkman... for some reason I couldn't find them on Fleabay earlier.
I'm after a pair of TR7 plastic LH & RH airbox covers, Part Nos: 83-4807 & 83-4808. (Preferably in good condition). If you have a couple spare in...
Yeah.... But then you find that you need a washer or some other gizmo which has been taken by aliens (or the dog in my case) never to be seen...
Lashed out with the credit card :( to get an SRM Clutch plate and a 7 plate clutch (and some new metal plates as the other ones were...
Fitted the barrels last weekend... (Trial fitted the head & barrels on the bench to sort out the crush/squish on the pushrod tubes). I used...
That’s probably where my clothes would be found!
I'm after a Grab Rail/Rack for my T140e (83-7264) needn't be mint but not bent or damaged. (UK only, no offers of one from Cameroon or the...
Just playing with the wiring under the seat.. putting in missing rubber grommets to protect the indicator wiring passing through the rear mudguard...
Can someone take a picture of their T140 RH Footrest position please as mine is bent slightly (see photo) and I need a reference to 'adjust' it...
The wiring on this was 'different' to what I'm usually used to on Jap bikes to be honest... The Neutral light wiring over the top of the casing...
Next up was the RH headlamp ear that was bent & looked manky. [IMG] I ordered a new one online and it when it arrived I wasn't exactly pleased...