Search Results

This is all very sad, but not surprising, I agree with prev posts about old engine design (for Triumph at least) and staff turnover etc. This is...

Wonder what the sentence would have been, if he'd been in a sports car!

This looks like the flanged sleeve, and retention rubber from the fixing at the very front of the tank, held in place by an m6 bolt.

I do! Well two actually!

How far is the adjuster screwed in/out at the clutch lever on the handlebar? If it's still fully screwed in, I would back off the one on the...

I have a tt600 so I'm assuming the tank removal procedure will be pretty much the same. Having removed the bolts lifting the tank up should reveal...

I would only split the calipers if the kit contains the small o rings that will be sandwiched between the two halfs.

I cannot be sure, but these screws may be the same as the ones that hold the rubber throttle bodies to the cylinder head, if they are, then you...

I'm with thebiglad on this, seems a bit strange to have to drain/remove parts of the cooling system to get at the sump, when i rebuilt the motor...

Sorry to disappoint, but as the owner of two TNT's, I think you have a problem, I keep my tanks at the max level (with the bike held upright), and...

A couple of years ago I purchased a Nicky Haydon repsol replica helmet made by KBC from a race shop in america, and yes it came with a Snell...

Hi, just looked in my tt600 owners manual, and it states the bike left the factory with 50percent mix of water and ethelyne glycol based anti...

Much as I'm a fan of guy, not sure he would be right for this, as far as I'm concerned the beeb is anti bike period, three Brits take the podium...

I agree, he should be sacked, a final warning should mean exactly that, anyone else, in any other job would have been straight out of the door, no...

Hi Nigel The tt600 tank connectors are colour coded red and white, as you look forward (as if you are riding the bike) the red connector his for...

Hi, welcome, good choice, I have two tt's though only one is currently roadworthy. If u like I have an early model, and a later one that I bought...

H iHi, when i needed new brake pads for my tt600 i used wemoto, excellant price, and delivered the following day. Martin w.

Hi Stevie, I suspect the part you are after is listed by triumph as 'footrest hanger rear' if it is the triangular shaped part, and is £53, the...

The first pic is exactly the same as the optimate lead I fitted to my tt600, it also fits the oxford Maximiser that I got as gift not so long ago,...