Search Results

I had the same reservations as you although if you look underneath the unit does sit above the cross members. I also put a heavy weight on the...

Mine was exactly the same, just remove where the line reaches and then fit gradually lower and lower spacers, i am in the middle of this at the...

sounds like it is a carburettor isdye float valves not closing a goid strip down get xan carb cleanet no need to split the carbs just get them of...

h i yes,mine was similar to yours i put a couple of spacers 15mm and a weight on seat to keep level then measured up to start with say 10 mm all...

[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi There. Got my new exhaust silencers fitted, really pleased...

It maybe because i have dropped the forks down the yolks a little further than standard although not convinced could do with about 100-150 mm off...

Thanks for those inspirational pics. Have ordered a pair of short reverse cone silencers off ebay in chrome hoping to keep the up-swept link...

Have you had any joy starting it today ?

have you took a spark plug out earthed it on the engine seeing if getting a spark ?

Also check this on you tube for static balancing of carbs, as unless the carbs of been off not sure why the springs would be wrong way round. [MEDIA]

also vacuum points on carbs need blanking odd you have cap on one, rubber tube on other and the 3rd is open !!

Might seem a bit of an obvious one have you got the clutch lever pulled in with side stand down as switch on clutch that prevents the bike starting.

Hi dont think layouts are crude at all, could you send me a blank version so can finalise my design , thanks think the lat design best layout, not...

Still very light

Hi on the battery front i got a cheaper one as reccomended by Ian at CRK, see his reccomendations below Iwent for the Moto batt one fits perfect...

Hi is the thread extractor snapped off flush or is there enough that you can get it out with pair of grips, or use a dot punch and hammer to chip...

Evening all....... Bit of an update, exhausts off again while wait for new kick up link pipes, fitted some baffles to the silencers. All...

Lol looks great idea.

Dont think be doing much on mine this weekend, decorating !! :(