Separate names with a comma.
What voltage are you getting and does it vary with load? A good battery should be around 12.4 to 12.7V when fully charged and disconnected or...
Greetings Adding a additional layer of foam to the seat might help. The cover on my T100 was stapled to the plastic seat base so should be an...
Greetings I have two Tigers, a 1973 and a 2017.
Welcome. Looks a good starting point. Most of the missing parts can be found on eBay or new at often reasonable prices from a good range of UK...
As others have said some photos would be useful. These would help to determine what work might be required. Going down the professional...
Looks nice and plenty of pillion room. What's happening with the bungees between the rack and number plate?
My 2010 T100 easily handled pillions including the Cookie Monster :) . The Triumph OEM luggage rack provided good handhold and somewhere to bungee...
A quick shifter at its simplest cuts the ignition when the lever is moved allowing a clutch less shift. There are plenty of third party options...
Welcome. I don't have direct experience of the bikes you mentioned but I would throw a first generation Bonneville 790 or an early Bonneville 865...
100% original bikes in general are offered for silly money and can end up being "Garage Queens" as they are too expensive to risk riding in...
Why not replace the expanding bar inserts with long bolts/ allen screws which fit the threaded inserts. I have done this many times for hanguards...
My Tiger 750
I use baking trays when I strip carbs. The raised edges stop vital bits rolling off and disappearing or picking up dirt.
It looks a fairly original US styled bike but the devil is in the detail and it would be a miracle if every part was original after 40-50 years...
It might be worth phoning Paul Goff, he is a font of knowledge for all things relating to motorcycle lighting. http://www.norbsa02.freeuk.com/...
If the paint is sound then brake cleaner and a paint brush are good for shifting stubborn muck. Using Muc Off or a water soluble de- greaser like...
Welcome. I wouldn't rule out all aftermarket pipes, I had a set of Long Vickers style pipes together with a de-baffled, double entry airbox on my...
I can't speak specifically for your engine but it is quite common to have a dribble of oil when removing the stator housing on most engines I have...
If you replace rusty parts with like for like then they will also rust eventually, not to mention the cost of original fasteners. Buy yourself a...
These engines are normally very tough and take a llot of abuse, failures like that are fairly rare. Hard to tell from the photo what has gone...