Separate names with a comma.
What puzzles me is why 44 of them are on SORN :neutral:
Could only have been Incorrect alignment on the assembly line. I've covered several hundred miles since fitting it and it was only today I...
The gaiter needs to be moved up before fitting the fork brace. Underneath the Speed Twin gaiter there are two locating grooves, once the gaiter...
That's definitely the part number for the brace that fits the speed twin. [ATTACH] I fitted mine after setting the forks parallel. So I cant say...
I recently purchased a stainless steel Harris stand and it didn't include the final machining process which prevented one of the bobbin forks...
The right hand fork leg will find its natural resting position a lot easier when the front wheel is no longer resting on the ground ;) Thought I’d...
But what if the reason the fork leg has to be levered out is because the mudguard is pulling it in out of parallel to begin with? I've had this...
So what would happen if an undersized [on the width] front mudguard was removed from the equation prior to the commencement of the axle tightening...
Smine
why would they want to hold onto something off a church roof?
Yes. Fully extended with clearance under the [cast] wheel
340 is stock according to the YSS website I went 10mm over the stock size, made bike much easier to lift onto the centre stand and still left...