Best Swingarm Stand For Speed Triple

Discussion in 'Speed Triple' started by Fitz Brundage, Jun 11, 2018.

  1. tcbandituk

    Subscriber

    Apr 8, 2016
    2,812
    1,000
    Reading
    Can't argue with that although part of the reason for it is it lifts the bike fairly high which is great for cleaning the wheels working on the chain, sprockets etc.

    How high does the Bursig go, can't really tell from the video?
     
  2. Pedro1340

    Pedro1340 Senior Member

    Jan 31, 2018
    618
    143
    .Glasgow
    I had the same stand delivered today,,no instructions,,then figured out that the stands wheels had to be removed to fit the dolly,,,then found they wouldn’t line up ,,,emailed company to see what happens now ,,I don’t want to try force it if it’s going to need returning...pissed off doesnt come close.
     
  3. Vulpes

    Vulpes Confused Member

    Mar 14, 2018
    17,974
    1,000
    Netherlands
    I found it annoying that the need to remove the wheels wasn't indicated. After I worked that out I found I needed to apply some force to get the pivots in place. Once assembled it works really well though.
     
  4. Pedro1340

    Pedro1340 Senior Member

    Jan 31, 2018
    618
    143
    .Glasgow
    Yes I eventually dismantled it and put it back together & replaced the two pins & circlips with bolts,,why it wasn’t this way or instructions included was disappointing,,works great now even on my rough garage floor,
     
    • Like Like x 1
    • Agree Agree x 1
  5. Bryan3R

    Bryan3R Senior Member

    Jun 22, 2018
    229
    293
    Southend, Essex, England
    Just got a 2 week old R&G singlesided paddock stand and new PIN6 from bike shop as the guy who brought it changed bikes.
    £36 less than a new one. Got front and rear now, but going to keep an eye out for a used Abba stand so I can do shock linkage or take yokes off,
     
  6. Bryan3R

    Bryan3R Senior Member

    Jun 22, 2018
    229
    293
    Southend, Essex, England
    #26 Bryan3R, Jul 1, 2018
    Last edited: Jul 1, 2018
    Tried both my stands out today, front is a Contistands from a German seller on ebay priced at £70.
    [​IMG]Untitled by Bryan Haynes, on Flickr
     
    • Like Like x 1
  7. Filipe Guerra

    Filipe Guerra New Member

    Aug 13, 2021
    15
    3
    Almada, Portugal
    Hi guys!,

    As anyone know if those single stands from 18/21 models is the same size and spec as the recent speed triple 2022?

    Thanks in advance :)

    regards
     
  8. RSReggie

    RSReggie Active Member

    Apr 9, 2019
    114
    43
    North West UK
    I believe the pre 2022 model (1050) was 27.5mm but the latest model 1200RS is about 40.5 mm - same as some Ducatis...

    So no not the same. WOuld be great if someone could make a sleeve from 27.5 to 40.5mm ....
     
    • Love You Love You x 1
  9. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,181
    1,000
    Rothwell
    https://www.motea.com/en/pin-adapte...-constands-single-for-ducati-40-7-mm-106611-0
    I might have one from my old ducati left over somewhere for the constands. I swapped the pin out to a 27.5mm one as it saved me buying a new triumph stand.
    Lots of different size pins for constands here:
    https://www.motea.com/en/mounting-stand-prod/adapters-and-essentials
     
    • Useful Useful x 1
  10. dav.a

    dav.a Well-Known Member

    Jul 29, 2018
    178
    93
    Argyll
    if anyone is interested I have the kit for the ABBA stand, the spindle for the skylift and the Constand single side arm rear paddock stand spindle all for Speed Triple 1050, 18 to 21. Changed my 2020RS for the new model.
     
  11. Damien Matthews

    Damien Matthews New Member

    Aug 5, 2021
    6
    3
    Cardiff
    Another good thread with the info I need.

    I am ordering the Bursig stand tomorrow. Granted there are cheaper options, but with how I like to store the bikes in the garage its going to save me lots of space and is just plain easy to operate and to get the whole bike up for maintenance.
     
  12. Tim Pote

    Tim Pote New Member

    Jan 11, 2022
    0
    1
    UK
    #33 Tim Pote, Jan 11, 2022
    Last edited: Jan 11, 2022
    If anyone is interested, I'm selling a brand new Constands Power Evo Central stand/lift, in black.

    Cost me a fortune when factoring in the import duty (bloody brexit). It's been assembled but never used. I didn't realise it requires replacing one of the engine bolts which I just don't have the tools for, and have opted for a traditional paddock stand.

    Collection only due to the weight of the damn thing. I'm in the Peak District, SK22.

    £150.

    [​IMG]
     
Loading...

Share This Page