Separate names with a comma.
As an update to this I have tried modifying the PRV because of its bad design which lets oil past the three threads when under pressure and hot,...
My T160 was built on a budget about six years ago and at the time it could have done with a rebore, ring etc and as the crank and bearing were OK...
One other thing you need to check is that the throttle slides are balanced, if someone has been fiddling and one or more slides are too high this...
I would normally say it's down to running lean because of the velocity stacks, but you say you have tried bigger jets, have you tried changing the...
Where in the rev/load range is the spluttering?
It's very easy to get the five speeds indexed wrong, I presume you have the manual? But it still may take one or four tries to get it right.
Could just as easily be the pilot screw needs a tweak as unless you do a plug chop (cut ignition without closing the throttle) you will just get a...
All air weapons in the US are not restricted like in the UK (we are only allowed 12 ft lbs) unless FAC licence is held, so your choice is vast as...
The wife has been watching the BBC series Line of Duty and first is have to say talk about the pot calling the kettle black, one corrupt...
No it was more like what you get when decokeing a head......needless to say we are two frying pans worse off :(
Tuesday I took the wife to the hospital and left her there;) It's quite close and thought she would be quite a while, anyway came home and thought...
I always use total deflection, not just one way.
