Separate names with a comma.
2008 Triumph Bonneville Black with Sixty8 accessories. Very low miles; only 2560. I had this bike in Arizona along with another bike that got...
I had to get the idle jets out with the special D tool in post 23. That and another good cleaning while on the bench. Now I just need to get 2...
I got it running! Thanks for everyone's help.
Found that there are several tools for these: http://www.newbonneville.com/html/d_tool.html or...
Yes it helps for setting the floats; thanks I am still trying to figure out how to remove and clean the idle jets. This is what mine have; what...
Thanks I will try that as soon as I figure out how to get them out. Here in the US these are plugged off sitting flush the the carb body and no...
Taking your advice capt I looked up carb diagrams online and found this: [ATTACH] Issue is my carbs don't have the Idle Mix jet next to the two...
Well pulled carbs again and really cleaned them; took them apart as far as I could. Carb cleaner and compressed air. They were much worse than I...
WOW! Thanks for all the info/help. I did not do a complete tear down of the carbs since I found the failed floats I figured that was my issue....
Oh also found the oil diluted with fuel so remember to turn off the petcock ...
Good Day All, Well I finally got the floats replaced (back ordered from local dealer). All back together but not running well at all. At first...
Thanks All. I will get back to this once I find the floats, clean things up and reassemble.
Honestly the carbs themselves are pretty clean so I don't think I need to go beyond a squirt of cleaner before re-assembly. Having the floats...
Brass because they will last and not crack and fill up. The plastic ones I just removed are completely disintegrating. Sorry to be clear the...
