Separate names with a comma.
Yeah I'm buying cleaners and wax today :)
UPDATE!! Hey guys, I lightly scratched the steel plates and bought some EBC Friction plates and springs from Ebay and installed them with some...
Almost done! I lightly scratched my steel plates, soaked the frictions for 26 hrs. Installed them in the correct order... Unfortunately the new...
Judging by my attached picture, would you say those plates need sanded? thanks for the feedback! [ATTACH]
Hey guys, I got the new friction plates, I put them in castrol oil and have a few questions.. 1. How long should I let them soak? I see many...
Hey guys, do I need a gasket for the clutch cover? When I took it off there was no sign if any gasket. If so, what is that part called? (see...
I will definitely look into loosening the clutch, but while I have it open and see that these clutch plates look pretty worn, do you think I...
Hey guys, here are a bunch of photos of my clutch plates, and the wear on my clutch basket. 1. Does the wear on the clutch plates look bad? 2....
You know.. now that I think about it, probably 15 minutes before I lost power, my clutch started slipping at higher gears. When I would shift up...
Yeah I can get the tire off of the ground, what would you suggest I try after doing that?
Yeah, it still sounds good like it is going into gear.
I drained the oil, it all looked clean, the engine still sounds great and revs, it is just as if it never gets into gear.
Thanks for all of the quick responses guys! 1. if I put the bike into gear when it’s off I can still push the bike with no resistance. 2. I...
Hey guys, I just bought a used 2009 STR with 17k miles and it rode perfectly for a few hrs and then when I was going home I down shifted from 6 to...
