Separate names with a comma.
Thanks for the offer, Im in Crewkerne so will contact you next week if thats OK
Attempting to make Camshft Locking Pins prior to carrying out check on valve clearances on my 2011 T100. I have some M6 Coach bolts and have filed...
Just returned to a T100 after a 2 year gap, but the bike has burnt out/corroded ignition switch contacts. Previously I recall seeing a post on how...
This is the puck I used...
Yes, still using the puck bolted on. Makes it a lot easier to lean the bike over onto the stand and then back upright. I first drilled a pilot...
Got Oxford heated grips so not any choice there (1" only available in cruiser style)
Bern doing a bit more digging and it looks like you can use the existing controls and levers by using reducing bushes and the 7/8" throttle tube...
Ive got a 2011 T100 with 1" dia handlebars but find that they make my hands ache after a while. Considering changing them them to 7/8" dia bars,...
I use a block in the garage but found that with a slight road camber it was a bit of a effort to get the bike upright
Just found a problem with hockey puck idea! If you have the side stand up and then take the bike off the main stand the main stand will then stop...
Pics of the stand in the raised position [ATTACH] [ATTACH]
