Separate names with a comma.
Thanks guys. TBH I spent a while looking for something that was rated to high enough amps to avoid the problem that I had in the first place. For...
Where can you buy a new connector, and how do you remove the old connector without cutting the wires, and what kind of a crimping tool do you need...
Decided to bite the bullet and have a crack at fixing this thing. Butchered my poor baby by cutting the yellow/blue wire on one side and the brown...
Yeah looks like i get continuity between the female side and the fuse. Also continuity between the male side and the ignition switch. There must...
Thanks Callumity. In an effort to avoid removing the triple tree and extracting those shear bolts I determined that it might be possible to...
Got any instructions for it? I couldn't find anything in the service manual.
Thanks mate. Garage just quoted me 150 for the lock and ~100 for the labour. Not too keen on dropping that much for a faulty connection. Just...
Hi all, thanks for the interest. In my second video I concluded that "dumping 12v straight into the socket for fuse 8 should light up the...
[MEDIA] ;) Bonus: [MEDIA]
I think it's the ignition switch.... When the ignition is set to parking lights, the circuit is: battery, brown wire, fuse 2, white blue wire,...
Checked fuse 8 looks fine, has continuity. The rear side of fuse socket 8 has continuity with pin 30 of the starter relay socket, which agrees...
Cheers Callumity, I updated my post above. Checked continuity on the relays. Getting continuity between pin 30 and 87a in unswitched position...
Thanks sprinter. I was hoping to avoid looking at a diagram with that many lines on it... And call me an idiot but I didn't realise the starter...
I agree Callumity. Can't seem to get under the relays to short the high amp side, looks like there isn't any slack between them and the fuse box....
It would appear so: https://www.manualslib.com/manual/804154/Triumph-Speed-Triple.html?page=365#manual I'll give it a go Dont think so, but it...
