Engine Rattle

Discussion in 'Technical Help' started by P.T., May 4, 2021.

  1. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    63
    28
    Cheshire UK
    But if its a Triumph thing.....it only effects a minority of these models.

    If they all did it.....I think that would make me feel better as its then normal.
     
    • Agree Agree x 2
  2. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,277
    800
    Yorkshire
    That's the procedure I've used on every wet sump engine I've ever serviced. Pre filling the filter is not mentioned in many service manuals but is good form IMO, even on engines where the filter screws on "upside down" like on my car. Brim the filter, then pour out the excess and the drain back valve prevents it emptying completely. Most oil pumps are capable of pushing oil through an engine at 60+ psi so I can't see how an air lock would be a problem.
     
    • Agree Agree x 2
  3. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    63
    28
    Cheshire UK
    No I thought the same.....but was willing to try in case the Triumph engine had a peculiarity of some sort.
     
    • Agree Agree x 2
  4. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    63
    28
    Cheshire UK
    Hi Fabio.....you made any progress getting that rattle tapping noise fixed.

    Nick in the UK.
     
    • Agree Agree x 1
  5. RickM46

    RickM46 Active Member

    Oct 12, 2023
    51
    28
    US
    Well, folks, I now have 500 miles on the Bonne (don't get out much) and the top end has no clatter now; only sound now is the whirrrrrr of, I guess, a balancer (didn't know it had one). Haven't wound it past 4K - only up to it several times. Still runs like a runaway train - hold on or else.
     
    • Agree Agree x 1
  6. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    63
    28
    Cheshire UK
    Its after the first oil change if its going to effect you bike......not all but lots.

    First oil change is normally around 500mls.

    Let us know how your is.....its only on a cold start....first 2 mins.
     
    • Like Like x 2
  7. RickM46

    RickM46 Active Member

    Oct 12, 2023
    51
    28
    US
    Did first oil change at 640 miles; used Castrol Power 10W50; did not notice any change in the valve train sound; clatter still gone.
     
    • Like Like x 1
Loading...

Share This Page