Daytona Won’t Start After Side Stand Cut Out

Discussion in 'Newbies Hangout' started by 2wheeler, May 28, 2020.

  1. Rocker

    Rocker Elite Member

    May 1, 2016
    1,662
    800
    Suffolk
    Sounds a right pain in the arse mate but don't let it beat you
     
    • Like Like x 1
    • Agree Agree x 1
  2. 2wheeler

    2wheeler Member

    May 28, 2020
    22
    8
    Wolverhampton
    mid it don’t work, a nice box of matches waiting for it

    first time messing with injection, so used to carburettors. But this how you learn your bike, not just putting rubber down but try to understand it lol
     
  3. 2wheeler

    2wheeler Member

    May 28, 2020
    22
    8
    Wolverhampton
    Saga so far

    changed air box and map sensor.
    Plugged in tuneECU and cleared old fault codes

    pushed bike out, and hit start button still would not start. Tried a few times 5 second intervals.

    plugged tuneECU back in (usb cable through my laptop) no new fault codes.

    on the diagnostic tab, fuel pump work when clicking test button and no fault messages.

    clicked map tab and wouldn’t show any map not sure if it’s meant to do so.
    Any ideas?

    74FF1D0E-797C-4AA8-86C3-64185A5228D8.jpeg

    71F10010-7288-43DC-BAEA-D06A0290C604.jpeg
     
  4. 2wheeler

    2wheeler Member

    May 28, 2020
    22
    8
    Wolverhampton
    Yes it’s on charge, I’ve put away for today, got my daughter here so will try having another look Sunday.

    can’t believe from cutting out from side stand pull away I’m having all this trouble lol
     
  5. 2wheeler

    2wheeler Member

    May 28, 2020
    22
    8
    Wolverhampton
    I’ve gone through loads on it, wiring loom is ok and all connections ok. I’ve come to the end of my tether with it. It’s booked in for a week sat freind of miNe is a mechanic and bike mechanic. So he will have time to fix it. In the whole time of having it I’ve just wanted to ride and couldn’t. I’ve gone and bought another bike just to be back on the road again.

    Once the bike is fixed I will post what was causing all the fuss so this thread can be used to help others.
    Once fixed I will be having it serviced and may consider selling not sure yet.
    But any how want to thank everyone for your help and guidance along the way it’s my first time in a forum and won’t be my last.

    think I’m going to save my pennies and look for a speed scrambler lol
     
    • Like Like x 4

Share This Page