Trident Yoke Interchangeability

Kelvin_2202 · Oct 16, 2016

Hello everyone

More questions im afraid

I have a silver yoke on my Trident with a carbon fibre cover which to me looks a bit naff, I noticed on my dads Daytona it has a nice black one, are they interchangeable?

This is the one I've been looking at on eBay....

http://www.ebay.co.uk/itm/LATER-TRI...699920?hash=item33c06cfbd0:g:3nkAAOSwo6lWINSo

Thanks in advance Kelvin

sprintdave · Oct 16, 2016

On the world of triumph site they are the same part number for daytona 900 and 1200 and trident. there are 2 top yokes on the trident folio, one shows as black so assume the other one is silver. the yokes are different part number for the 750 and 1000 daytona

http://www.worldoftriumph.com/trium...?block_01=&block_02=304363-0-2&block_03=70124

http://www.worldoftriumph.com/trium...p?block_01=&block_02=301701-0-2&block_03=3645

If unsure ask Ivan at national triumph,he is very helpful

t552 · Oct 16, 2016

Kelvin you will need to check offset. I can't remember exactly but there was some differences of 5mm but it was so long ago I'm not 100%. Get the ruler out and check but if there was a difference that's where it would be

t552 · Oct 16, 2016

All my references give trail as 105mm so Indecate the same. I have a black yoke on my 91 but was for a trident. Please check the offset against your dad's to be sure.
I agree the black is much better.

Kelvin_2202 · Oct 16, 2016

As always lads, thanks very much for the replies I will look at the offset and go from there, if it's not compatible I can always sand my down and spray it satin black.