Turn Off Or Re-set Service Light On A 2019 Speed Triple Rs

AFAIK Tunecu only works up to model year 2015, don’t know about dealer tool.

 

you can reset the service indicator from the menu

 

I’m only going by my experience, I had to disconnect the battery to install heated grips and upon reconnecting the spanner light came up with an indicator of 0 miles till service even though it said 5000 miles before disconnecting. So I reset the date and mikeage in the menu and then the spanner light went out.

 

I have always used TuneECU on my Tiger 1050 - Windows software was free but I just had to buy and OBD cable.
I also want to do my own servicing on my 2019 RS and contacted DealerTool and they replied only yesterday that the latest RS is covered by their software and so £60 well spent. The same tool for my S1000RR cost me nearly £500!!!

 

I have a speedtriple s 2019 and the above worked for me after fitting heated grips

 

I'm using dealer tool, and think it works great.
Here are some videos
https://www.youtube.com/playlist?list=PLHUYld1ILQc-s8HXzkP-M7bOs4fZkAOOu
I've been looking at getting TuneEcu as well, but not sure it will work as well ast DT.

 

ive a speed rs and i purchased a lonelec obd2 dongle and tuneecu and it works fine.
Just remember to switch the bike to "run" (but not start) to get it communicating. You can then start it once that is done.

 

Works with Bluetooth adapter only. Check on TuneECU face book group, Alain is on there too and he Wrote the program.

 

My service light was on telling me service overdue.
I looked thru utube for my 2019 speed triplr 1050rs.
My menus didn't show reset !!.
Seemed a visit to a dealer was needed.
I decided to set the bike date to a year earlier.
Horray, tricked it, service light now off
It really worked