Swapping Sprint Rs Footpegs For Daytona Or Speed Triple Ones

Has anyone done this and are they a straight swap?
The Daytona/Speed Triple ones look almost level with the top of the mount. I reckon at least half an inch lower than the standard Sprint RS ones and possibly slightly further back.

I took the rubber off my Sprint RS ones and it felt better. I hope this mod will gain another 1/4 inch over the derubberised RS pegs.

3 hours later..........after some research. Still can't find definite sizing: re fitting on Triumph items. Have decided that Oberon is the way to go. Should get another half inch down and back.