Speed Triple immobiliser light stays on, bike wont start!

Discussion in 'Technical Help' started by Democles, Mar 15, 2017.

  1. Democles

    Democles New Member

    Mar 14, 2017
    0
    1
    Portugal
    Hello guys,

    I have a Speed Triple 1050 from 2011 and when I put the key and turn it on, the immobiliser light stays on (light with a bell. Bottom right corner) and bike wont start! Eventualy, after switching on/off some times, the light will go off and the bike will start, but its a total pain and im afraid it will eventualy not start at all....

    Did domoane have something like this? any advice? Some guy told me their triumph dealer replaced several parts like the ignition lock and keys or even maybe the immobiliser itself...but I realy wanted to avoid that....

    Thanks
     
  2. anthony gothard

    anthony gothard Well-Known Member

    Mar 2, 2016
    114
    93
    lancashire uk
    can we assume you have the datatool alarm fitted ?
    if so this is a common problem and alarm is on a recall. ive a 2016 speed and its on its third alarm. same issues as yours
     
  3. Carter

    Carter Member

    May 26, 2016
    19
    8
    Brough
    Yep... check the recall number. It's a common fault
     
  4. Democles

    Democles New Member

    Mar 14, 2017
    0
    1
    Portugal
    I bought the bike used, some years ago, and as far as I know there is no alarm installed.
    However I'll check this and see whats up.
    Thank you guys for the help
     
  5. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    You got another key to try ?
     
Loading...

Share This Page