Speed triple 2011 indicator relay

Discussion in 'Technical Help' started by JACKO, Feb 26, 2014.

  1. JACKO

    JACKO Member

    Sep 25, 2013
    71
    18
    Hi folks

    I've just got some triumph led indicators for the front of my speed, they came with the relay kit as part of the deal.

    Question is does the relay kit work for all four indicators once installed IE one relay to work all four led indicators?

    The kit does not have any instructions with them, I can get them off triumph website but won't have them printed off till the missus prints them off at work.

    If the relay does work all four indicators then I can ditch relays I have in series with micro leds I fitted when I fitted my tail tidy at the rear and tidy wiring in the rear end?

    Anyone fitted a relay kit that is supplied by Triumph?

    Thoughts or help appreciated

    Thanks to anyone in advance
     
  2. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    #2 SteveJ, Feb 26, 2014
    Last edited: Feb 26, 2014
    Yes my 2011 came with Triumph LED's.

    Firstly you can not mix LED indicators with normal indicators you need all four and then just add the Triumph relay and it should all be good.

    Not sure if they work with micro led's as the resistance might be different and you may need a relay for each indicator.

    I think I still have a spare new LED indicator in the garage as well if you need it.

    With regards to a tail tidy mine had a R&G one as well as an 3 into 2 arrow exhaust which you then get issues with clearance from the exhaust. R&G do a bracket that lifts the indicators up so that they clear them by a decent amount, but you have to watch you leg when you get on and off the bike as you can catch them.

    Hope this is of some help

    Cheers

    Steve
     
  3. JACKO

    JACKO Member

    Sep 25, 2013
    71
    18
    Cheers for reply Steve

    I fitted micro indicators Leds on the small R&G bracket so they sit within the exhausts, those brackets that put the indicators above the exhaust looked crap to me and yes you did catch them getting on and off.

    I will fit the relay and see what happens, I will post back and let you know how I got on.

    Cheers

    Pete
     
  4. JACKO

    JACKO Member

    Sep 25, 2013
    71
    18
    Fitted the triumph front indicators and guess what?

    The flash rate is spot on, so the relays at the rear end must have corrected the flash rate.

    Probably still fit the triumph relay kit in time but no rush now. Got the instructions printed off the triumph website.

    The triumph leds look great and you can see them when they are on when sitting on the bike, so another visual reminder if you forget to turn off when your riding
     
Loading...

Share This Page