Speed Triple 2009 Engine Mount To Frame Shims

I removed the engine from my 2009 Speed Triple and didn't notice any engine to frame shims. It was quite a tight fit and when it eventually moved down I noticed a shim on the floor. The oem parts diagram mentions part no.13 as a shim going up in 0.5mm sizes. It must have come from the rear 4 mounts. Is there a usual position where the shim is placed? I presume I tighten up the 3 front mounts first then check and shim the 4 rear mounts if needed. I presume the swingarm must be in position and torqued up. Any previous experience/advice welcomed.

 

All now clear thanks to Mr Haynes. Tighten the lhs bolts then check and shim any gaps on rhs.