Remove Upper Chainguard

Discussion in 'Speed Triple' started by Appoooh, Aug 16, 2017.

  1. Appoooh

    Appoooh New Member

    Apr 20, 2017
    9
    3
    Sydney Australia
    How do you remove the upper chainguard on the 2016 model? Do you have to remove the rear mudguard first?

    I was a little too enthusiastic about lubricating the chain and now chain oil drips all over the garage floor after a ride. Was able to remove the plastic panel near the front sprocket and clean this but the chain guard bolts are inaccessible to an amateur.
     
  2. R_1000

    R_1000 Elite Member
    Subscriber

    Sep 2, 2016
    1,476
    700
    UK, London
    As DD said above :)

    Or I think you will need to remove the wheel as I think the chainguard bolts are behind the swingarm:(. I am only guessing here. Confirm it before going down that route
     
  3. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    You have to remove the rear wheel as there are 3 torx screws holding it on, one is easy and two req a short torx bit and spanner as the chain gets in the way.
     
    • Like Like x 1
  4. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,218
    1,000
    North Yorkshire
    What DD said then! o_O
     
  5. Modalconfusion

    Modalconfusion Active Member

    Jul 28, 2016
    211
    43
    Stafford
    Damn that answers my question I think
     
  6. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    On the bright side you only have to remove a clip and one nut to remove the wheel :)
     
  7. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,431
    800
    Cornwall
    With a 'kin big spanner! :grinning:
     
    • Like Like x 1
    • Agree Agree x 1
Loading...

Share This Page