Mods all done

ok I have replaced air filter, snorkel, baffle out, O2 sensors and SAI removed Tec 2-2 fitted then remapped. Not attempted anything like this before but am pretty pleased with myself. I do have a few niggles, primarily there is more vibration, is this normal or have I possibly got an exhaust mount done up too tight or wrong?
I miss the shiny chrome and the welds are a tad agricultural but for a budget exhaust I am very happy. It does sound so much better, sounded pretty loud with baffles in until I was following a Harley.
Del Boys garage is a great help and the made even SAI a breeze, most stressful bit was the remap more to do with hoping I had not f'd my bike up than difficulty!
Thanks for the help on here guys and for the moral support

 

Yep breathe intake done, I did have a moment of which way should the hangars go so will have look after work tomorrow. Only other thing I did not do was change the limiter on the remap. When that screen came up I was not sure so left as was!

 

Vibes was a factory set throttle body imbalance, called twin power, chatted on phone. Ran the monitor and there it was. That yellow painted screw is a bugger to adjust where it's located on a hot engine! Smooth as now