Mags For Spokes

Discussion in 'Builds & Projects' started by James Bolton, Oct 4, 2017.

  1. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    Hi I am looking to swap or part exchange my mags for spokes on a T100 Bonneville . So any info welcome where I can get this done .
     
  2. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,216
    1,000
    North Yorkshire
    The T100 has spoked wheels and the SE and other Bonnevilles have mags. Remember that there is a difference in front wheel size! Spokes are 19" and mags are 17"
     
    • Agree Agree x 1
  3. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    Thanks for the info but are the interchangable .
     
  4. MickEng

    MickEng Noble Member

    Sep 29, 2016
    1,805
    450
    West Yorkshire
    The spokies are a lot harder to clean than mags and I believe you can only use with inner tubes and not tubeless tyres.
    Worth thinking about ?
     
  5. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,216
    1,000
    North Yorkshire
    Good point mate!
     
    • Like Like x 1
  6. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,216
    1,000
    North Yorkshire
    Also a good point!
     
  7. H.O.

    H.O. Noble Member

    Nov 28, 2015
    1,045
    300
    ARDROSSAN, AYRSHIRE
    Spokes also snap, especially the rear, costs the same as a tyre change plus spoke(s), there are about 7 different part numbers if I recall from my own experience.
    IMHO spokes look nicer than cannon wheels!:eek::)
     
    • WTF WTF x 1
  8. v8dve

    v8dve Member

    Feb 13, 2016
    25
    18
    Southampton
    My spokes are tubeless...
     
  9. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    Think I might just have mags painted .
     
  10. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
     
  11. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    2010 model . Sorry for late reply had so many messages don't know who I have replied to .
     
  12. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    Think I will stick with my mags . Everything for motorcycles is so expensive . Maybe cheaper to trade bike in for different model .
     
    • Agree Agree x 3
  13. Cafe Hinckley

    Cafe Hinckley Well-Known Member

    Nov 2, 2016
    176
    93
    Reading
    Hi James,

    The best person to speak to is Doug Richardson (http://www.drwheelbuilding.com/triumph.html) - he used to work fro Triumph and now hand builds wheels as a full time job.

    He did mine on custom Talon Hubs and they are the absolute business.

    Yes they are not cheap but you get what you pay for and IMO there is not a better look!!

    Hit him up and see what he can do for you.

    Regards
    Jonathan
     
    • Useful Useful x 1
  14. James Bolton

    James Bolton New Member

    Oct 4, 2017
    0
    1
    Merseyside
    Thank you for the info
     
Loading...

Share This Page