M Blaze

Rkt120 · Dec 29, 2020

Hi to all, hope everyone has had a great Christmas and got out on the bike I’m going to put it out there I have absolutely no clue about electrics wiring and a lot of other things I want to get some mblaze pins but what I would appreciate knowing is do I have to get anything to go with them like connectors so I can wire them in more like a plug and play, sorry for my lack of knowledge for this probably easy task. Thanks

Ducatitotriumph · Dec 29, 2020

Hi there,
Its pretty easy to fit indicators as its only 2 wires and easy to trace back to the connector.
Also, if you don't see them working when you install them, try and reverse the connections.
Another also, dont' forget the below as it's going to be required.
You don’t mention what bike you have so i'm only thinking newer stuff. If you have an older bike a relay upgrade may be reqd.

https://motogadget.com/shop/en/mo-blaze-adapter-triumph.html

Hobnail · Dec 29, 2020

These little babies from Motogadget (m-Blaze) are LED technology. They consume much less power than normal incandescent blinkers. The problem on motorcycles is the OEM flasher units are generally simple thermal types and will not work with low power LED's. You probably will need a new flasher unit.
Motogadget makes several options like this:
https://motogadget.com/shop/en/m-tri.html

I don't know if the newer bikes have LED's and independent flasher unit. What year is your ride?

Rkt120 · Dec 29, 2020

Thanks for the reply’s, it’s a bonneville t120 16 plate which I know you can change the settings for use with led indicators but just wasn’t really sure on what I would need to get with the indicators so I could contact them (idiots guide)