Immobiliser Light Stays On. Bike Not Starting.

Wayne Lawrence · Sep 23, 2019

Hi.
Trophy SE 1215cc 2014.
Went on holiday for a week. Came back and bike won't start. Immobiliser light (bell) stays on.
I have tried the other key I have with no luck. Still the same.
Battery is charged. Screen goes up when ignition turned on and all other lights come on and clock hands go to full right then back to left again but immobiliser light is always on.
I don't have an alarm fitted. Just the manufactured immobiliser.
Any thoughts or help would be helpful.
Many thanks.
Wayne.

Rspete · Sep 23, 2019

Maybe try disconnecting the battery, it might reset itself
Other than that I've no idea buddy.

joe mc donald · Sep 23, 2019

Wayne Lawrence.
Check all the usual switches and check for loose wires or dirty connectors. If not you may have a failing immobilizer switch on the bike.
Regards
Joe.

Wayne Lawrence · Sep 24, 2019

Wow!
Just save myself a pile of cash. Problem sorted!
It was the dreaded cable chafing issue across the head block.
Ended up taking the ignition barrel assembly off and repairing cables and adding cable zip ties to stop movement.
Handle bars off, and ignition barrel off was the longest job but all good in the end. Re-routed some of the cables and left the ignition multi plug loose under left compartment so it can move with the steering.
A good job done better after repairing them before with things in place. Better to take things apart to get more room and find all faults.