Heated Grips

Discussion in 'Triumph General Discussion' started by In my own world, Aug 12, 2019.

  1. In my own world

    In my own world Senior Member

    Dec 22, 2018
    277
    113
    West Sussex
    My Tiger is fitted with Triumph heated grips. I want to change the handlebars. How do i get the remove the grip on the left side and can it be reused and working?. The throttle side is a doddle as it's on a tube.
     
  2. Gazwhitespeed

    Gazwhitespeed Senior Member

    Jul 30, 2015
    346
    113
    Northampton
    Poke a small screwdriver down the grip then squirt some wd40 down,work your way around the grip,then get a longer screwdriver and do it all again and it should come off with no damage,that's how iv'e done it in the past.
     
    • Like Like x 2
    • Useful Useful x 1
    • Agree Agree x 1
  3. Gazwhitespeed

    Gazwhitespeed Senior Member

    Jul 30, 2015
    346
    113
    Northampton
    Sorry just re-read your post,if they are triumph one's then they won't be glued they will probably be screwed into the bars in 2 places,just slightly pull the grip back from the switch end,you should then see one of the screws,then you will have to drill your new bars,or fit oxfords which are far better anyway.
     
    • Like Like x 2
    • Agree Agree x 2
  4. In my own world

    In my own world Senior Member

    Dec 22, 2018
    277
    113
    West Sussex
    Cheers. Decided that the chrome bars old fashioned looking. Am trying to find a new set in the same pattern but in brushed alloy or matt black.
     
  5. Gazwhitespeed

    Gazwhitespeed Senior Member

    Jul 30, 2015
    346
    113
    Northampton
    Your best bet is renthal,when i had my KTM i just typed the model in renthal's site and they will send you their bars that are closest to yours in the colour you want.
     
    • Like Like x 1
Loading...

Share This Page