Head Stem Internal Diameter

Discussion in 'Speed Triple' started by Chewie, Jan 22, 2017.

  1. Chewie

    Chewie Member

    Dec 16, 2016
    48
    18
    Melbourne Australia
    has anybody here got a front paddock stand that fits into the bottom of the head stem, if so can you tell me the exact diameter of the pin?
     
  2. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,431
    800
    Cornwall
    #2 Col_C, Jan 22, 2017
    Last edited: Jan 22, 2017
    15mm
    I'd recommend this stand here
    Supplied with 5 pins (inc 15mm)
    Also see my post here
     
  3. Col_C

    Col_C I can't re...Member

    Aug 5, 2015
    1,431
    800
    Cornwall
    Just checked your location......
    Maybe you'll have access to UK eBay after a post Brexit trade deal. ;):D
     
    • Like Like x 2
  4. Chewie

    Chewie Member

    Dec 16, 2016
    48
    18
    Melbourne Australia
    Sorry, I neglected to specify the model of my bike. Its a 2010, and they are all the same from 2002-2010.
    The stand I bought came with 6 pins up to 19mm and they are all too small. The diameter of the stem is in the 23-25mm range.
     
  5. Yorkshireman

    Yorkshireman Crème de la Crème

    Dec 12, 2015
    3,399
    1,000
    Barnsley
    #5 Yorkshireman, Jan 23, 2017
    Last edited: Jan 23, 2017
    I'd suggest a 24mm pin then:rolleyes:
     
  6. Chewie

    Chewie Member

    Dec 16, 2016
    48
    18
    Melbourne Australia
    I'm thinking you are right, but before I order it I want to be sure that it is correct. Hoping that someone might have had a stand and could confirm it.
     
  7. Chewie

    Chewie Member

    Dec 16, 2016
    48
    18
    Melbourne Australia
    I have had confirmation from a couple of sources......it is 24mm
     
    • Like Like x 1
Loading...

Share This Page