Featured Handlebar Risers.

Discussion in 'Bonneville' started by Cupoftea, Sep 19, 2019.

Page 1 of 5
  1. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #1 Cupoftea, Sep 19, 2019
    Handlebars on the T120, nice and solid, bit too narrow for me but getting use to it. Main problem is that they are too low!
    Looked around for risers or spacers, cheapest were £40 for 2 bits of turned alloy and some old looking bolts.
    Lucky I work in a toolroom :D.
    Measured some dimensions and made these. I bought a couple of titanium bolts and here we have it 25 mm rise on the bars, lovely position now.

    IMG_20190919_165121.jpg

    IMG_20190919_165142.jpg
     
    • Like Like x 15
  2. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #2 Cupoftea, Sep 19, 2019
    Thanks, I did something similar on another forum and nothing came of it.
     
    • Agree Agree x 1
  3. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #3 Cupoftea, Sep 20, 2019
    Hi,
    I made another pair this morning.
    I'm waiting to place the order for bolts.
    I would like to sell say 10 sets over a small period due to being busy.
    My price will be around £30 plus post a set and proceeds will go to the Distinguished Gentleman's Fund.

    IMG_20190920_080911.jpg
     
    • Like Like x 15
    • Love You Love You x 1
  4. Repooh

    Repooh Rarely Satisfied

    Jan 5, 2018
    1,430
    1,000
    Stabby Town
    #4 Repooh, Sep 20, 2019
    Doh, where were you when I dropped £55 on exactly the same
     
    • Agree Agree x 1
  5. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,625
    1,000
    Southcoast of the UK Earth
    #5 darkman, Sep 20, 2019
    Quality item and a nice idea :)
     
    • Agree Agree x 4
  6. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,216
    1,000
    North Yorkshire
    #6 steve lovatt, Sep 20, 2019
    Too low? You should try the bloody R Nine T ! :D
    DSC_0309.jpg
     
    • Agree Agree x 1
  7. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #7 Cupoftea, Sep 20, 2019
    You got the wrong bike:confused:
     
    • Funny Funny x 2
    • Agree Agree x 2
  8. Winglad

    Winglad Crème de la Crème

    Dec 21, 2016
    2,429
    1,000
    Earth
    #8 Winglad, Sep 20, 2019
    They want you always to be able to kiss the badge without moving your head an inch...

    o_O
     
    • Funny Funny x 6
    • Like Like x 1
    • Agree Agree x 1
  9. OsteKuste

    OsteKuste Intergalactic Warlord
    Subscriber

    Oct 22, 2017
    2,197
    943
    Tennessee, United States
    #9 OsteKuste, Sep 20, 2019
    Or to be bent over to receive the maintenance bill...
     
    • Funny Funny x 3
    • Agree Agree x 2
  10. Sandi T

    Sandi T It's ride o'clock somewhere!
    Subscriber

    Dec 3, 2018
    22,317
    1,000
    Tucson Arizona
    #10 Sandi T, Sep 21, 2019
    Ahhh, but other forums pale in comparison to The Triumph Forum, Cupoftea!! ;)
     
    • Like Like x 2
    • Agree Agree x 2
  11. Sandi T

    Sandi T It's ride o'clock somewhere!
    Subscriber

    Dec 3, 2018
    22,317
    1,000
    Tucson Arizona
    #11 Sandi T, Sep 21, 2019
    That is terrific that you are donating the proceeds to the Distinguished Gentleman's Fund, Cupoftea! A very worthy cause. I'm riding in it again this year and it's coming up soon--a week from Sunday! Beautiful risers--beautiful workmanship.
     
    • Agree Agree x 1
  12. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #12 Rudeboy, Sep 21, 2019
    Excellent modification i ended up with the riser blocks from square deals on the thruxton but yours look much neater fair shout to you for donating the proceeds.

    IMG_8273.JPG
     
    • Like Like x 1
  13. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #13 Cupoftea, Sep 21, 2019
    Thanks, well buy mine and sell those funny things. :D
     
    • Like Like x 1
    • Agree Agree x 1
  14. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #14 Rudeboy, Sep 21, 2019
    your absolutely right please put my name on the list as its going to a good cause you can drop me a pm with the payment details ect and i can fire you my address across cheers,
     
    • Agree Agree x 1
  15. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #15 Cupoftea, Sep 21, 2019
    I noticed that your mounts are smaller in diameter, the ones I've made are 33mm. Do you want another size to suit?
     
    • Agree Agree x 1
  16. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #16 Rudeboy, Sep 21, 2019
    Hi mate well spotted i just looked at your pic again as you have the T120 totally different headstock setup I have just used a vernier gauge and measured at the lowest point of the base 21.50 mm and the current blocks are the same one inch rise shall i whip it apart in the morning and pm you some more accurate measurements or will this do as not sure of the indent under the bolted original mounts,
    cheers, Nick
     
    • Agree Agree x 1
  17. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #17 Cupoftea, Sep 21, 2019
    If they are just straight spacers then no problem, obviously cost will be less as no bolts required. If they are shaped in any way, let me know the sizes and I can machine them in.
     
    • Like Like x 1
    • Agree Agree x 1
  18. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #18 Rudeboy, Sep 21, 2019
    Thanks I reckon the bolts will be too short looking at it all so ill strip it in the morning easy enough and suss it up cand send some pics also if that helps
    thanks
     
    • Agree Agree x 1
  19. Cupoftea

    Cupoftea Noble Member

    Dec 16, 2018
    567
    343
    NEW FOREST
    #19 Cupoftea, Sep 21, 2019
    No problem, let me know the original bolt length.
     
    • Agree Agree x 1
    • Love You Love You x 1
  20. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #20 Rudeboy, Sep 21, 2019
    Sure thing will doi measure it all up first thing tomorrow bloody lights gone now
     
    • Agree Agree x 1
Page 1 of 5
Loading...
Similar Threads - Handlebar Risers
  1. Traveler

    Handlebar Risers

    Traveler, Jul 3, 2023, in forum: Bonneville
    Replies:
    5
    Views:
    1,990
    Traveler
    Aug 7, 2023
  2. ZShyster

    Sold: Motone Up-and-over Handlebar Risers

    ZShyster, Oct 14, 2021, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    847
    ZShyster
    Oct 14, 2021
  3. snarly

    Sw Motech 30mm Handlebar Risers - Speed Triple

    snarly, Sep 21, 2019, in forum: Parts, Accessories & Clothing
    Replies:
    1
    Views:
    1,312
    snarly
    Sep 28, 2019
  4. Mark Daws

    Handlebar Risers For Street Triple Rs 2018

    Mark Daws, May 10, 2019, in forum: Technical Help
    Replies:
    19
    Views:
    10,737
    Ducatitotriumph
    Jun 7, 2019
  5. GOT

    Anyone Fitted Handlebar Risers To The 2018/19 Speed Triple?

    GOT, Feb 18, 2019, in forum: Speed Triple
    Replies:
    15
    Views:
    8,288
    Bryan3R
    Jul 6, 2020

Share This Page

Sign up