Tiger 1050 Gear position indicator

Jack-Be-Quick.com will soon have one that should work on all newer Triumphs with gear position sensors integrated into the ECU. It plugs into the OBDII connector and unlike GIPro, will display the gear regardless if the bike is in motion or not. (GIPro compares RPM with speed after being "taught".) This new unit does not need that, as it reads directly from the sensor. As a bonus, it can momentarily display ambient temperature and on initial startup, it will also momentarily display available voltage. It has been successfully tested on my 2012 Thunderbird for a couple months now without fault. Currently, it is set up for 1" handlebars, but will soon be made for 1.25" (32MM) handlebars as well. If the demand is there, it can likely be made for 7/8" bars too.
There aren't any Tiger Sports being imported to USA, so cannot tested on them, but if interested, contact me at [email protected] and I'll try to find out if this is going to work on them.