Clutch Adjustment

Discussion in 'Bonneville' started by Traveler, Apr 20, 2024.

  1. Traveler

    Traveler Well-Known Member

    Jun 21, 2023
    144
    93
    Helena, Sweet Home Alabama
    It's been a few years since I've had a clutch with a cable instead of hyd. Between that & old age I seem to have forgotten.:rolleyes:

    2023 T120.

    If I want to move the engagement point out (away from the handlebar) do I turn the adjustment screw in or out? I'm referring to the adjuster on the clutch lever.

    Tks, TM
     
  2. Samsgrandad

    Samsgrandad Senior Member

    Dec 15, 2019
    571
    243
    Somerset
    Adjust it so that you have less free play at the lever, but make sure that you still have some or you will wear the clutch prematurely
     
  3. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,137
    800
    North Yorkshire
    The adjuster is a normal right hand thread so winding it anticlockwise (out) will move the bite point further out.
    Give it half a turn increments, then try again to see what suits you ;)
     
  4. Traveler

    Traveler Well-Known Member

    Jun 21, 2023
    144
    93
    Helena, Sweet Home Alabama
    Thank you ELDON:)
     
    • Like Like x 1
  5. Traveler

    Traveler Well-Known Member

    Jun 21, 2023
    144
    93
    Helena, Sweet Home Alabama
    Think that did the trick; 1/2 turn and she's as she should be.
    Tks again!
     
  6. Cycleman

    Cycleman New Member

    May 17, 2024
    2
    3
    Alberta, Canada
    On cable type clutch's you want about 2-3 mm of slack at the hand grip. My ST900 calls for that, so I would think the other Triumph cable clutch's would be similar.
     
    • Like Like x 1
Loading...

Share This Page