675 Change ST ABS suspension for that of the STR ABS?

ResB675 · Mar 11, 2015

First post, so hi all.

Might seem like a odd question but, if I wanted to change the suspension on a standard 2014 ST ABS to that of the 2014 STR ABS is it as simple as just changing the Forks and rear shock? Or are there electronics to consider or anything else which makes the whole idea cost prohibitive?

Thanks for any pointers.

jon675 · Apr 12, 2015

You would need forks off a 14 (for the abs sensor bracket) callipers not sure if they are abs specific or you could use older model ones if not ,and master cylinder also not sure if you need one off an abs fitted model. Then you have the fun of bleeding the abs system.

You would have to check with Triumph for compatibility I did this swap on my 13 but had no abs to worry about so could use older model bits with no issue

Forums

675 Change ST ABS suspension for that of the STR ABS?

ResB675 New Member

jon675 Member

Abs Brake Fluid Change

ABS light on after disc change.

Touring Three Days Touring Southern Arizona: A Mother Nature "inspired" Change Of Plans

Clutch Slipping On Kickstart After Oil Change?

2003 Triumph Speed Four - Headlight Change?

Share This Page

Useful Searches

675 Change ST ABS suspension for that of the STR ABS?

ResB675 New Member

jon675 Member

Abs Brake Fluid Change

ABS light on after disc change.

Touring Three Days Touring Southern Arizona: A Mother Nature "inspired" Change Of Plans

Clutch Slipping On Kickstart After Oil Change?

2003 Triumph Speed Four - Headlight Change?

Share This Page