Centre Stand Onto Se With 2-1 Tec 'tracker' Exhaust

Discussion in 'Bonneville' started by DorsetFox, Jun 18, 2020.

  1. DorsetFox

    DorsetFox New Member

    Feb 1, 2020
    10
    3
    Dorset UK
    Hello there

    Been fitting my factory standard centre stand to the 2010 SE, and it includes rubber stops that fit to the bottom of the factory silencer. However my bike has a TEC Tracker fitted which rides much higher, meaning that the stand will sit too high and compromise the chain.

    Has anyone else found a way to dealt with this?
     
  2. Jadorff

    Jadorff Noble Member

    Apr 14, 2019
    879
    443
    Adelaide Australia
    I have a braket to hold one rubber stop made to fit the bike as I had the same problem with thethe bracket that came with the stand , the stand hit the pipes
     
  3. Mischa Vladivostok

    Mischa Vladivostok Well-Known Member

    Feb 9, 2015
    234
    93
    Dublin, Ireland
    TEC usually ship a bracket for this. It's fiddly as hell to get the rubbers out of their original location and in that bracket (had to hack at the rubber a lot with an x-cutter), but definitely doable. Been riding with it for 4 years now.
     
  4. DorsetFox

    DorsetFox New Member

    Feb 1, 2020
    10
    3
    Dorset UK
    Thanks for the replies fellers. Very helpful. Looks like a purpose made bracket and stop is the answer. I tried the TEC one but it isn't long enough for the factory stand.
     
Loading...

Share This Page