2022 T100 First Valve Gap Check At 20k Miles?

Discussion in 'Bonneville' started by rpg51, Oct 15, 2024.

  1. rpg51

    rpg51 Member

    Feb 3, 2024
    29
    18
    Vermont
    Am I reading the service schedule correctly? No valve gap check for 2022 T100 until 20K miles?
     
    • Thanks Thanks x 1
  2. Samsgrandad

    Samsgrandad Senior Member

    Dec 15, 2019
    583
    243
    Somerset
    Yes that's correct. It applies to most of the modern classics, including the Speed Twins and Speed 400
     
    • Agree Agree x 1
  3. rpg51

    rpg51 Member

    Feb 3, 2024
    29
    18
    Vermont
    Amazing. I won't put 20K on my bike in five years or even more. Will warranty coverage for burned valves expire after two years? I wonder if they have data supporting such a long service interval for valve adjustments.
     
    • Funny Funny x 1
    • Agree Agree x 1
  4. usaabn

    usaabn Member
    Subscriber

    Aug 17, 2024
    23
    8
    western north carolina
    Those of us with long memories. Remember near constant care of valve lash. Except on my Honda VF750f. I just replaced the cams at regular intervals. It is a thing of the past. I think that proper service allows the extended valve inspections.
     
    • Funny Funny x 1
    • Agree Agree x 1
  5. rpg51

    rpg51 Member

    Feb 3, 2024
    29
    18
    Vermont
    I'm 73. My experience is mostly cars where yes, hydrolic lifters, no worries. But, no matter what Honda says, my 2003 Honda S-2000 needs valve gaps checked once early in its life and then every 10K or so thereafter. The consequences of tight valves are too great. I have a 2022 Royal Enfield that is similar.

    I guess I would feel better doing a check early just to be sure things are ok.

    It does worry me that they have the first check after the warranty is oftentimes expired.
     
  6. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,277
    800
    Yorkshire
    Both my 2020 & 2022 Street Scramblers had 20k valve check intervals, as does the new 1200. I had the lid off both SS's around 8k to check the clearances and some did need adjusting, more so on the first one. They weren't actually under spec but very close. Wether they'd have lasted another 12k is difficult to say as valve clearances tend to move in the first few K and then settle down IMO.
    Irrespective of scheduled maintenance intervals, I just like taking things to bits wether they're working or not, just to see how they work.
     
    • Like Like x 2
  7. rpg51

    rpg51 Member

    Feb 3, 2024
    29
    18
    Vermont
    To an extent, yes. I am with you there. Frankly, I am not all that confident that the valves leave the factory properly adjusted, so its probably a good idea to check them at least once early. Maybe even at the first service.
     
    • Funny Funny x 1
  8. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    63
    28
    Cheshire UK
    I checked mine at 5000mls.....I was looking for a cold start tapping noise.....valves where fine.

    Exhaust where toward to upper limit....which is fine as the gap closes as wear takes place.
     
Loading...

Share This Page