Search Results

OK, sorry if this is getting boring. I'm pulling my hair out :( Still the same, runs for around half an hour. Now it is definitely a fuel issue...

Guess a quick check for sparking while it's hot too might show something?

After half an hour, bike sounds like it's running out of fuel for around five seconds, then dies. If you try to restart doesn't try to fire, but...

It definitely seems electrical so coils might be the culprit. Can they be tested with a multi meter?

I've had the fuel tap out and checked the filter etc. Runs for half an hour - until it gets properly hot. You can leave it half an hour and...

I've had the fuel tap out and checked the filter etc. Runs for half an hour - until it gets properly hot. You can leave it half an hour and...

Well - new crank sensor fitted, and bike is exactly the same :( Runs for 30 mins then dies like she's run out of fuel. Funny thing is - won't...

Thanks again - fingers crossed I'll be posting positive results tomorrow...

[ATTACH] New sensor should arrive today from Sprint (very good service) - do you measure the clearance from any particular point? Then it's...

With the probes touched together the reading is .001 so guess it's new crank sensor time?

I'll go check the zero. Many thanks again

[IMG][IMG][IMG] Hope the photo's come out this time - or I might need to start another thread lol. [ATTACH] [ATTACH]

[IMG] [IMG] Trying to test the crank sensor - is this the right setting on the mulrimeter? Only usually use it for continuity and voltage tests...

[IMG] So I guess this is the cover, and the wire/grommet are for the crank sensor? Thanks. [ATTACH]

Latest - I've removed the sidestand switch and bypassed it. the gaiter on the plunder had gone rotten, and the plunger was rusted and sticking....

Well - taken the sidestand switch off and bypassed it - wires were breaking down (connect the blue and brown wires). Still trying to gets the...

Thanks for that - thought it might just be clearance around the outside of the box spanner. Not much room! Are the doughnut seals under he rocker...

Thanks for the pointers. Looked at the side stand switch, and it was sticking, and also the wires are breaking down (brown wire insulation...