Separate names with a comma.
What I could do with is can anyone link a walk through of how to correctly bleed the brakes using the ECU tune app? As I wonder if I've been doing...
So I rebuilt the calipers back in march coming out of the winter period, fitted new seals on both calipers and the pistons were very smooth but I...
Ill run a test. If it is warped (lets speculate) what would be causing my rotor to keep on warping after just a few hundred miles?
So I'm back. I have thoroughly cleaned the bobbins, they were not too bad any way. I have got a couple of new pad pins and am fitting them today....
When you say are the pad pins seized - to be clear - are they catching on the pin rather than moving freely over them?
Hi all, My front discs on my Tiger 1050 keep warping 2 new sets. Can't be unlucky that they are both faulty parts so what else can it be? I...
As we all know the lights suck on the 07-12 plate tiger 1050's so what kits can people recommend for this? There are so many out there I want to...
Cleared the code with Tune ECU last night, stayed clear for about 100 meters and came back on, I'll take the advice and try a few cycles
O2 eliminator worked a treat. Fitted a new rear ABS sensor and still get the same error code. I've got a 2nd hand pulser so going to pop that on...
Cheers for the emission heads up, it's a no brained then £15 compared to OEM lambda sensor £145
So update - I detached the sensor and put the volt meter on it to measure the resistance and surely enough the ohms is ever rising rather than...
I thought it wouldn't be, means I can give it a solid clean at least
Reading up from the Lambda sensor - if there are supplied with inconsistent or low voltage they can return false error codes so I was wondering if...
interesting read. So looking at that most likely that the sensor error is caused by something else other than the actual sensor most of the time....
Can you simply remove the pulsar ring, fine wire wool it to clean it up and win or is it coated with anything that would cause this to worsen if...
Error codes from this morning [ATTACH] [ATTACH] [ATTACH]
So cleaned up the sensor and rode to work this morning after clearing the codes. Had a new batch of different codes pop through. Ill post below.
yes its an ABS light that come on with a few issues. Recently hand the rear wheel off for a bearing change and since then the lights been on so...
does anyone have any ideas on this one or can explain the fix for me?