Search Results

I have a pair of remus mufflers fitted to my r i really prefered the shape then i fitted a x pipe, a resl bugger of a job as i did not remove the...

I have fitted Remus and love the shape and sound !!

I use a battery tender while my bikes and car are not in use also, just a way of keeping the batteries activated !! Ha!ha! we are heading into...

Oops! should have looked at the date on the post !

Hi there, i have a Davida and also a carbon fibre Bell 500, both open face and the Davida is far better, no lift, no noise,light and by far the...

Hi there Pedro, i started riding 50 years ago and still do, the comradrie in the pre-jap bike days often meant helping a broken down biker out....

Like i said earlier, riding a motorbike used to be out of hardship or for the love of riding so there was a common passion acknowledged amongst...

I guess when i was young and riding we were on a bike for the love of motorcycling not as a "pose" statement. I still nod to one and all , get a...

My "R" also "pops" quite a lot on overrun as well but after removing the cat and fitting the baffleless Remus mufflers i expected this. It doesn't...

I have had my tank off a few times now and works easily.

I used pointy nose pliers and pushed on the "eye" part of a cable tie on the ends and squeezed the "tabs" on the fuel connector to separate.

Yes Andy, i originally fitted the whole kit and decidedthe position was too extreme, was told the higj risers would'nt fit but being a mechanic i...

You are right, i did'nt try my original bracket as i fitted the low risers originally and of course cut the hose. I willhave a closer look when i...

I doubt the master cylinder will clear the fairing with the original long bracket. The cylinder on mine is on the same "plane" as it was with the...

You will not need the longer hose as the shorter master cylinder bracket stays on the bars, not the risers

You can swap the risers back with the fairing fitted as i have done it with mine, bleed screw on brake master cylinder runs close with rubber dust...

I have fitted the original risers back on my Thruxton r with the fairing, master cylinder bleed screw runs close at left lock but otherwise its...

You sure will enjoy it, i do !!!

Hi guys, i live in Tasmania and have owned many bikes even one of those American things once with yards of chrome and after 18 years it still...

Hi Chris, i fitted Remus mufflers with the restrictor removed when i purchased my R, i recently fitted a "Meercat" crossover to eliminate the...