Separate names with a comma.
I am planning to replace the bulb in my 2013 T100with an H4 LED. There is a second bulb at the bottom of the headlight assembly, i presume that...
That is a much more sensible design. Probably a computer does the timing and switches with a transistor of some sort.
Success. I replaced the turn signals with LEDs on the 2013 T100. On almost any motorcycle (not just triumph), you will probably run into...
Turns out a 1 page instruction did come with them, it was behind the invoices that were in the shipping package. They discuss this very issue —...
I must say I was supposed both that the shocks didn't install easily, and that there were no instructions at all shipped with them or the fork...
I called my local battery retailer when I needed a battery last year, the Lithum Iion battery was about 50% more than a lead acid, be sure not to...
I bought a set of Tec Bike Parts shocks for an air-cooled Bonneville T100. The old shocks came off fine, but the new shocks won't slide on to...
I have been using the Oxfords heated grips the last few rides - it is still cool enough to enjoy them. They have a mode to detect if the bike is...
It makes sense the engine could be exactly the same for EFI or carb systems.
Well seems to operate fine as it is. Threw me for a loop since I was just following the Haynes book and youtube. Had the tank and throttle bodies...
Interesting. That is a big difference in displacement.
On my 2013 T100, I checked the throttle free play as part of the never-ending heated grip install project. It appears to not have the correct...
I am curious, are the engine block and cylinder head the same on the 2007 carbed and 2008 injected engines? Could you take an engine out of a 2007...
Your friend should take a beginner course or review your local licensing instruction manuals.
Hat tip to @Iceman who pointed out in another thread the oxford cruiser grips can be trimmed. I trimmed them and was able to fit the bar-end...
Trimming the oxford grips allowed me to use the original bare-end weight. Thanks!
Well they might be decorative as they are only 10g.
The diameter is too large to fit in the heated grip tube. The 2013 T100 bar ends are only 10g which makes me wonder if they are decorative. I...
For the bar-end weights, I am tempted to find some 1" round stock, cut two pieces of similar weight the stock triumph weights, and drill a hole....