Separate names with a comma.
You should warm it up a little bit before taking off depending on the temperature and the oil you're using. Cold, thick oil will flow thru the...
It's unlikely the coils would overheat and quit at the exact same time.
Twin with one combustion chamber.
1966 Sears Allstate 175 twingle cylinder Puch. Traded a moped for it.
Curious why you changed shocks. I have stock Street Cup shocks and unlike other OEMs I've had, they work very well for 2 up riding. The softest...
I wanted radials on my Street Cup so I went with the Spirit ST. I have the Roadriders on a smaller bike that doesn't have proper rims for radials....
Some bikes (like my Yamaha) go into closed-loop mode whenever the clutch lever is pulled in so connecting the wires together permanently, you...
Just noticed my Street Cup switch isn't working anymore. I'm going to replace it with the Honda switch part# 35340-MM5-600. I test fitted one last...
It's not what's in car oil that's causing problems if the clutch doesn't slip. It's what's NOT in the oil that's the problem. Motorcycle specific...
Picked up a 2023 Monkey 125. Been wanting one for years. Glad I held out and got the updated motor. :grinning: [IMG]
Most semi-synthetic blends have very little synthetic oil them. Some have only around 5%. It could even be less since there are no regulations to...
[IMG]
Z125 fresh out of the crate: [ATTACH]
I'll probably never put the Cup seat back on unless the wife prefers riding on the back of the Yamaha. Can't test that until it's warm enough for...
Why you guy's Cup seat not fitting with the rail? I'm using button head bolts and the Chinese mount is flat where it bolts down. It looks like the...
The only advantage for me would've been the left rear mount not being welded on crooked. I still would've had to bend the loop up to clear the...
Mine is a Chinese copy of that T100 grab rail and it doesn't fit over the Street Cup/Twin taillight. I had to bend the rear up to clear it because...
I installed the Street Twin seat also. It felt confining with a little less rearward room than the Cup seat so I reshaped the foam to sit back...
I would measure the output of the switch (continuity to ground) with the bike running just for peace of mind. It should be the opposite of what it...