Separate names with a comma.
Could someone who has the official accessory 4 bar tank badge please post accurate measurements of what size they are? Looking to see if they will...
I have about 5,000km on my 2018 T100: wanted the T120 but couldn’t really justify almost 1/3 additional price at the time. Mostly ride it for...
I’m back! With 0.85 springs fitted front and back (rear is stamped Öhlins) and tweaks to the valves too. It’s taken a bit of setting up (setting...
Detector, not illegal in NZ (yet)
So under this connector there are 5 tiny spade connectors; if you take the cover plug off, pull out the rubber bungs, you can wire to these with...
I ignored the manual and adjusted rear preload as it only had 20mm total sag on standard setting. Standard rear spring is still 100, recommended...
I’ve noticed it getting a little easier, similar mileage to yours. I’m fairly good at set up but even with everything set up soft it still needs...
[ATTACH]
I am the first owner, went from factory settings to comfort settings in the owners manual after setting the sag. Handles beautifully on smooth...
Will post specs of what has been done when I get the parts back but looks like softer springs, including rebound springs, open up compression...
I’m only 71kg or 155lbs so the Speedie feels like a bit of a brute over the bumpy roads we have in NZ, even on so called comfort settings I’m...
A fair bit but the Speedie is much lower geared plus on the Duke it’s so violent you hardly ever crack the throttle hard unless upright. Speed is...
Have the zip tie on, not quite using all of it, will try to get some help with setup I think. Otherwise it’s great fun, really a blast to ride....
I think compression is more the issue as we are crashing into bumps?
They were standard but have come out by about four clicks, also softened compression quite a bit. I’m almost out of compression adjustment now,...
I got my total rear sag down to 35mm by winding out 1 1/2 turns of preload, front I seem to move between 41mm and 39mm no matter what I do
I’m loving the motor, so much punch out of corners and the quick shift is really smooth too. Gearing is spot on for road use. Have set sag and...
What’s happening here then? [ATTACH]
Yes thanks, wondering if the wires need some form of connector to fit into that socket, or if they just push in. I’m no electrician!
Go easy then, it’s night and day different!