After market levers advice wanted

I've fitted these to my 2015 '94R, cheap as chips but good quality IMO. Perfect fit and function.

Warning: You have to swap over a brass bush from the OE clutch lever, many have made the mistake of not realizing this and end up with a floppy lever.

 

I've got similar ones as above but have the folding option.... perfect for the money

 

If aproach them through the forum you get a discount

https://conquestcarbon.com/product/evotech-triumph-speed-triple-folding-levers/

 

I've got ASV levers on mine, came fitted when I bought the bike. I think they are great and look 'quality'.

 

Couple of pics

 

One more

 

Last one

 

Ha yeah matey had chucked loads of carbon at it too!!

 

Looking myself at the moment... think I'm going down the Harris folding lever route. had them on my 1098s and they were spot on. cost £120 for the pair, cheap Chinese nine times out of ten are fine but the anodising doesn't last and a few sets I've had in the past are quite "floppy" regardless of what you do to them and you can see them flapping with every bump.

 

I use Pazzos levers and their quality is brilliant.

 

Bad Dogs from Sport Bike Shop, £30 each!

 

I went with Pazzos, cost me about $185 Australian. Check out PJ's parts in the US. Great people too deal with. They have them for $150 USD which is about 122 British Pounds