Here's a new original Triumph tacho on Ebay. Good quality and you know it will work and be accurate……. http://www.ebay.co.uk/itm/Triumph-S...916828?hash=item3acb3da09c:g:3FAAAOSwknJXxJtr
Link to pins Link to resistors Link to diode Link to piggybacks Japanese 4mm bullet male, female and doubles all over Ebay. I soldered all my connectors on, except piggybacks, just crimped. Don't particularly like crimped, but can add a bit of solder for extra. This is my solution, and can be confirmed this is the same as a certain other chap wants to charge money for. Have shown this to someone who paid, and he has confirmed that the adapter is simply two resistors and diodes, as i posted back on page 3 of this thread. I have seen one, and is as above. My Tacho was dodgy, and am awaiting a new one from china, that is what has taken me so long to get this all sorted. Once I have it all in place, I will put up step by step instructions for the world to see. I am currently waiting on my supplies being delivered and hopefully I can supply you with some kits asap. Delivery from china takes about 2 weeks, so having to wait, jap bullet connectors are expensive from UK suppliers, and I am a tight git ! This is a relatively easy fit. The 'adapter' supplied by A.N.Other, is just 2 pins, one length of heat shrink, one tiny bit of multicore wire and the coil connection piece soldered up, so there is still a fair bit of DIy and soldering required. Will do my best to put some 'kits' together Big thanks to a forum member for all his help and assistance on this little venture (Not DLJ, by the way)
Nice one! Thanks for the update. Hopefully guys who need this will be able to source the bits either from the 'net or your good self ……….. and NOT from the guy who was hoping to make a quick buck from the genuine guys on his forum.
Super Mr O can't wait for the step by step and if you put kits together put me down for one. Great work.
Will do, once I have all the bits and piece's, I'll post up a solution and adapter, kits etc. Once all worked out.