Exhaust choice on Speed Triple r

I think I would be more interested in weight and performance than how loud a pipe is. Even the performance is secondary when riding on the road. Funny how your priorities change as the years roll by.

 

Have twin arrows on my 2011r. Have seen some folk saying they're to loud with the baffle out but for me it's far from it.... bike before was a blade with a racefit black edition, now that's loud.
Would love to match that on my speed and make it sound a little more aggressive.

 

I have the double arrows on 2016r, and pretty happy with it. Not too loud.

 

I have not removed the baffles yet, actually going to soon as I find it fairly quiet with baffles. I come from a Ducati Panigale, now that's proper loud. Not sure how the baffles on these arrows come out??

 

They are a very tight fit. Check if there is a small screw holding them in, mine didn't have but they still required some effort to remove them. Most peeps take the cans off and use something like a broom handle down the tube in the direction of the gas flow to push them out.

 

Welcome Mart,
I doubt you'll find them too loud without baffles. I took them out before fitting and never had the urge to put them back.
If the dealer's fitting them before delivery I'd suggest you ask them to remove the baffles first. Much easier for you to slip them back in if you do find them too loud.
Don't forget, make sure the dealer gives you the OE cans and link pipe (+ the baffles and screws for the Arrows).

 

I went for the accessory Arrow lowboy on my 2016 R.

I was a bit concerned that it might be too loud but it's definitely not. The sound is just perfect and it looks good, as well as dropping lots of weight.
If you're near London you're welcome to come and listen to the sound.

 

Hi there
I have had my new speed triple r for a month got arrow cans on it with db killers removed sounds awsum I am well chuffed. Anybody fitted evotech tail tidy with arrow cans does it fit ok. Gary

 

I have quill twin pipes on mine I didn't want to follow the crowd so chose something different they sound fantastic

 

Very very nice

 

It looks good and as mean as F##k

 

I ran twin high level SC Project on a Monster 796 & they looked fantastic.
Looking at SC Project for the Speed Triple there's lots of options, starting at 390 Euro for the low can.

Currently running high level Arrows with an Evo-Tech tail tidy on my 15 reg Speed R.

 

I have an evotech tail tidy to fit with high arrows on my 2016 model tonight. Looking at your picture, the indicators look a bit squashed against the exhaust. Is that the case and is the heat any problem?

 

Hi There
I want to fit a evotech tail tidy on my 2016 speed r I have arrow cans fitted will it fit ok phoned evotech they didn't know if it would.
Help me please!!

 

Well I am going to try tonight... will update after!

 

Ok finished fitting the evotech tail tidy and it fits, with the arrow high cans, but just about. The stock indicators are very close to the carbon end cap on the exhaust. I think it should be ok. Took me about an hour to do. Quality item and miles ahead of likes of R&G. Every individual part came seal packed separately and they even included a free LED torch. Came with led plate light and reflector +bracket. I did not retain the rubber padding/spacer that was underneath the stock tail, seen in the last picture. Removing it probably helps with the indicator clearance to exhaust. Instructions on evotech website is very clear. Finally happy with the result and worth waiting for.

 

That's fantastic. Been thinking of ways to mount a plate above the indicators on the standard bracket as I don't like the way they normally look with a tail tidy fitted but that looks f@@@@@g great . Time to order one !!
Thanks for the post and pictures