Turning The Bike 180 Degrees

Spinning the bike on the prop stand is not that difficult.

 

Let us know how it goes, and photos of the finished product!

 

If you have a centre stand, what about one of these....



...approx 40x40cm, made from 4mm steel plate and the deck is just under 25mm off the floor.
I don't trust those screw type scissor lifts. I had one for the Street Scrambler and the whole thing collapsed when the threaded bar stripped while I was lifting it. A right pile of shite. I ended up modding it with a small 1.5T bottle jack I had lying around.

 

I do that regularly with my 115kg dirt bike but with a 200+kg road bike? It's not that difficult once you've got the knack but the stand isn't made to take that sort of abuse.