Bike Dryer

Hi all,
Has any one got one of these and are they any good? I know there not a top brand name but it will sit in the garage most of the time.
Thanks in advance

 

I had a Chinese made one very similar to that. Had it about three years and then the motor burned out. Got a Bruhl now.

 

I've had a METRO Vac'n'Blo for about 12 years now and never had a problem with it. It's probably more than paid for itself in terms of 'return on investment' for the amount of corrosion it's prevented over the years. It's hard to imagine how much water gets "trapped" in the unseen nooks and crannies of your freshly washed and rinsed machine, but once you've used a powerful blower on it, post wash/rinse you'll be amazed. I also bought a small "refurb" Bruhl dryer that is now on loan to the Blood Bike group for use when the liveried bike is returned to base and washed or rinsed - particularly useful at this time of year.

Any dryer is worth having but my advice would be to get the best you can afford - the little Bruhl seems to work very well - and one with a variety of nozzle adaptors to reach into some of the tighter areas. If you do a comparison look for "horsepower/wattage" rating and get the biggest you can afford. Just be careful where you point the narrow nozzle!

 

I've had of those for a few years now. It works well. I bought it purely to dry the bike after washing. They are a bit noisy on max blowing velocity.

Just pop some ear defenders in.

 

Looks exactly like mine. Works well.

 

Looks same as the one I have. No complaints at all, does the job just fine

 

We have a cheap Chinese - made pet dryer off Amazon that looks very similar and does the job well.

 

I just use an old leaf blower.

 

Same here.

 

Well i got a shami.

 

Leaf blowers work fine but they blow cold air and they're unfiltered so any dirt and grit they suck up gets blasted at your bike. Only use in clean surroundings.

A dedicated bike dryer allows you to focus the blast. Brilliant for driving moisture out of fiddly spots like switchgear and chains. My KTM 1190 has done 60,000 miles and still scrubs up like new. That's entirely down to using a bike dryer (and ACF50..).

 

I've been using it since about 2001 and it's been great!

 

I bought a Bruhl MD1900 dryer back in Nov 2020, at the time £120 from Sportsbikeshop. Best bit of bike care kit I've bought, I wouldn't be without it.

 

My go to dryer is a Bruhl duel heat dryer, been using it for many years with no problems at all. Prior to buying it I used an air gun attached to my compressor, although I had to turn the pressure down to low.

 

I use a Wickes 20L Wet & Dry Vacuum; connect the hose to the blow outlet. It has crevice nossels etc to direct air to tight spots. Works well. I don't use it as a Vacuum but I do have a clean bag inside which traps any airborne partials. Obviously cold ait only but works very well.

 

This is the one that one of my lads has and he is well pleased with it.

 

I just ride it out wet and crank it up to 100 MPH for about ten minutes.

Kidding, of course.

The wife used to have a K9 grooming and training business. She has a pet dryer that looks exactly like the Bruhl. I've used that, but more often than not I just use the EGO battery powered leaf blower. No cord to follow you around.

 

That is pretty much what I used to do!

I'd prefer something tailored for the job with a filter, but there's no filter when you are riding it.

 

I bought the same on Amazon and would recommend.