To all thats been following my post bellow ..after the third cold start the check engine light was still on...i have a Bosch 1200 scanner that i use for our autos...i blew my mind when it was comunicating with the bike ecu.... found code P1685.... I removed the code and check engine light is off...what i dont understand is this started after removing battery terminals etc
Found this... The code refers to the ECU relay that lives under the seat. Have a look at it and see that it's seated and plugged in correctly. The code can also come up if fuse number 5 is faulty or has a faulty connection. It's labelled as "ECM relay" on this photo: And this On a 2014 Triumph Speed Triple R, code P1685 typically indicates a fault related to the "Throttle Position Sensor (TPS)" circuit, signifying that the motorcycle's computer is not receiving a proper signal regarding the throttle position, potentially leading to issues with engine performance and fuel delivery.
